null

Fullerton Tool 92030 | 9mm Diameter x 9mm Shank x 22mm LOC x 64mm OAL 4 Flute Uncoated Solid Carbide Ball End Mill

$48.16 $30.34
(You save $17.82)

Out of stock

Ships:
From Partner Facility
Brand:
Fullerton Tool
Mill Diameter (mm):
9mm
Number of Flutes:
4
Length of Cut (Decimal Inch):
0.8661"
Length of Cut (mm):
22mm
Shank Diameter (Decimal Inch):
0.3543"
Shank Diameter (mm):
9mm
Overall Length (Decimal Inch):
2.5197"
Overall Length (mm):
64mm
Material:
Solid Carbide
Finish/Coating:
Uncoated
Single or Double End:
Single
Ships:
From Partner Facility
IsDiscontinued:
SKU:
25001220
UPC:
Weight:
0.30 LBS
Shipping:
Calculated at Checkout
Fullerton Tool 92030 | 9mm Diameter x 9mm Shank x 22mm LOC x 64mm OAL 4 Flute Uncoated Solid Carbide Ball End Mill

Features

  • The 3200 General Purpose end mill has 4-flutes and was designed for use in titanium, super alloys, hardened steels, stainless steels, steels, cast iron, brass & copper, and low si aluminum
  • It is offered in a variety of configurations and is available with single-end and double-end designs
  • The 3200 General Purpose end mill is stocked uncoated and with FC-20, TiAlN, TiCN, and TiN coatings

Product Specifications
Cutting Diameter (Decimal Inch) 0.3543"
Cutting Diameter (mm) 9.00mm
Cutting Flute Length (Decimal Inch) 0.8661"
Cutting Flute Length (mm) 22.00mm
Shank Diameter (Decimal Inch) 0.3543"
Shank Diameter (mm) 9.00mm
Overall Length (Decimal Inch) 2.5197"
Overall Length (mm) 64.00mm
Coating/Finish Uncoated
Metric/Inch Metric
Number of Flutes 4
Helix Angle (Degrees) 30
Flute Spiral Direction Right Hand
Direction of Cut Right Hand
Point End Type Ball
End Type Character Designation B
End Type Single End
Coolant Through Non Coolant Through
Weldon Flat No
Length Standard
Length Designator SD

 

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Brand:
Fullerton Tool
Mill Diameter (mm):
9mm
Number of Flutes:
4
Length of Cut (Decimal Inch):
0.8661"
Length of Cut (mm):
22mm
Shank Diameter (Decimal Inch):
0.3543"
Shank Diameter (mm):
9mm
Overall Length (Decimal Inch):
2.5197"
Overall Length (mm):
64mm
Material:
Solid Carbide
Finish/Coating:
Uncoated
Single or Double End:
Single
Ships:
From Partner Facility
IsDiscontinued:

Related Products