Page 18 - All Industrial Tool Supply 2018 Summer/Fall Catalog

ChuCk Stop SetS
Position Small Parts In 3 Jaw Chucks Eliminates the need to
Big Savings – Small investment machine soft jaws STRONG
MAGNETS
Place your part in your chuck without measuring everytime when you’re working smaller and
shorter with repeatability! This 3-piece chuck stop set from OTMT is your answer to machining below the jaw.
Powerful magnets provide a secure hold and much shorter set-up times – and that’s not even counting the time
spent machining soft jaws! Paper-thin ±.002" (±0.05mm) parallel surfaces keep the parts where you need them,
so you can stop feeding your lathe chuck by the bore-ful!
• Front and back surfaces are parallel within ±.002" (±0.05mm). Include:
• Allows small and short parts to project past the chuck jaws, and 3" Diameter 3 Piece Sets
not fall inside the bore. • 8.5, 11.5, and 14.5mm stops.
• Anodized aluminum finish. 6" & 8" Diameter 3 Piece Sets
3" Diameter • 15, 20, 25mm stops.
• Mounts magnetically on the face of any 3 jaw chuck 3" to 5". 6" & 8" Diameter 5 Piece Sets 45 %
6" Diameter • 15, 20, 25, 30, 35mm stops.
• Mounts magnetically on the face of any 3 jaw chuck 5" or larger. BlUe 3 Piece Set
8" Diameter
• Mounts magnetically on the face of any 3 jaw chuck 8" or larger.

3" Diameter 6" Diameter 8" Diameter
Model Order Mfr. List SaLe PriCe Model Order Mfr. List SaLe PriCe Model Order Mfr. List SaLe PriCe
Color
# # Per Set Per Set # # Per Set Per Set # # Per Set Per Set
3 Piece SetS
Red 3CS3R 69-500-518Rd $130.00 $69.99 3CS6 69-500-520Rd $139.99 $79.99 3CS8R 69-500-522Rd $175.00 $99.99
Blue 3CS3B 69-500-519Rd 130.00 69.99 3CS6B 69-500-506Rd 139.99 79.99 3CS8B 69-500-508Rd 175.00 99.99
5 Piece SetS
Red — — — — 5CS6 69-500-521Rd $219.00 $119.99 5CS8R 69-500-523Rd $275.00 $157.49
Blue — — — — 5CS6B 69-500-507Rd 219.00 119.99 5CS8B 69-500-509Rd 275.00 157.49
pro ViSe work StopS
Single & Double Sided
Low profile
design

As Low As:
$ 53 99 10 %
doUBle Sided

• Low profile design stays below the top surface of vise jaws for cutter clearance.
• Versatile design allows the 1/4" hardened stop rod to be quickly and
accurately positioned.
• Lever arm can be rotated out of the way for cutter clearance and accurately
relocated for repeat setup.
• Non-marring 1/4"-20 nylon tip set screw used to secure stop rod mount without Model #03-000 6" Single Sided Shown in USe
damage to lever arm.
• Locate long stock with the included stop rod collar. Description Model Order Mfr. SaLe
• Body made from red anodized 6061-T6 aluminum. # # List PriCe
Double Sided 6" Single Side 03-000 99-008-235Rd $59.99 $53.99
• Allows two workpieces to be located for increased productivity. 6" Double Side 18-000 99-008-238Rd 89.99 79.99
pro ViSe Jaw Stop Mill Caddy
With the Mill Caddy from Edge Technology, you can now hang your vise
handle, dead blow hammer and air line from the front of your mill table.
10 % The Mill Caddy puts your most frequently used tools at your finger tips,
yet out of the way, allowing for a less cluttered work area.

• The stop pin is positioned completely
below the top surface of vise jaw to
allow for cutter clearance.
• Fits all milling machine vises with
1/2" - 7/8" thick jaws and 1/8"
minimum protrusion.
• 1-1/8" wide body with 2 hardened steel
guide pins and large
#10 clamp screw are used to secure
the unit to the vise jaw. 10 %
• 1/8" x 2" hardened stop pin is used to Shown
in USe
accurately locate workpieces.
The stop pin is also adjustable • Designed to mount using the T-slot on the
Model #06-000
Model #14-000
side-to-side to allow for oRdeR #99-008-229Rd front of the mill table. oRdeR #99-008-224Rd
cutter clearance. $ 49 • Made from high strength aluminum. $ 99
• Body made from anodized aluminum. • Durable, red, anodized finish.
• #8-32 non-marring flat point set 22 EA. • Vise handle slot width: 3/4" 21 EA.
screws are used to secure stop rod. Mfr. List $24.99 • Hammer slot width: 1-1/8" Mfr. List $24.99
18 We Carry Over 500,000 Items From Over 800 Brands To Meet Your Needs