Page 700 - All Industrial Tool Supply | General Catalog

MACHINE ACCESSORIES • Phase Converters
698

Static PhaSe converterS

important: how to order…
• Do Not install a larger size PHASE-A-MATIC or Heavy Duty series thinking it will give you more HP. The PHASE-A-MATIC HP range is determined by the minimum and
™
™
maximum starting current applied to it at any one time. The largest motor on your machine, or the idler motor, if used, must fall within the minimum and maximum HP
range marked on the PHASE-A-MATIC . Do not add HP of the power feed, coolant pump, etc. These rely on the generator effect of the main motor. The only time you
™
would add the HP of two or more motors together would be if they always started at exactly the same time.
• For multiple motor applications, the largest motor must always start first and it must be at least 50% larger than any other motor starting on the same converter.
• Two-speed motors are dual HP. Select the PHASE-A-MATIC with minimum and maximum HP which fall within or very close to the minimum and maximum HP of the
™
motor. For example: A 1-1/2 HP 3,450 RPM motor is 3/4 HP at 1,725 RPM.
• Some European soft-start motors draw less starting current than normal and therefore require a smaller than normal converter. Most Taiwanese motors draw greater
amperage to start than normal. Therefore, for Taiwanese motors we recommend you use model #PC-600HD for 3 HP motors, model #PC-900HD for 5 HP motors and
model #PC-1200 for 7-1/2 HP motor etc.
tech tip:
When to Use heavy Duty Series PhaSe-a-Matic ™
• Lathes above 3 HP not fitted with a clutch.
• Air compressors (the motor pulley) must be reduced by 1/3, or a 50% larger motor must be fitted.
• Long heavy starting cycles, frequent starting or instant reversing, unattended motors, if jogging is required, or if there is a chance of the motor being stalled during use.
Regular & Heavy Duty Static Phase Converters
Easy HoRSePoweR MaxiMuM aPPRoxiMaTe MoDeL oRDeR PRiCe
installation Range aMPeRage weigHT # # eaCH
ReguLaR STaTiC PHaSe ConveRTeRS
APPLICATIONS: 1/3 ~ 3/4 2.8 3 lbs. PC-100 85-202-011 $139.99
• Runs more than one machine. 3/4 ~ 1-1/2 5.2 3 PC-200 85-202-012 149.99
• Can operate 2 speed motors. 1 ~ 3 9.6 3 PC-300 85-202-013 169.99
3 ~ 5 15.2 3 PC-600 85-202-014 209.99
FeATureS: 4 ~ 8 24 3 PC-900 85-202-016 229.99
• Instant reversing. Heavy DuTy STaTiC PHaSe ConveRTeRS
• Runs 220V, 3PH equipment 1/3 ~ 3/4 2.8 3 lbs. PC-100-HD 85-202-020† $169.99
on 220V, 1PH power for light 3/4 ~ 1-1/2 5.2 3 PC-200-HD 85-202-017 189.99
to moderate loads. 1 ~ 3 9.6 3 PC-300-HD 85-202-018 209.99
• Will produce approximately 3 ~ 5 15.2 4 PC-600-HD 85-202-019 279.99
2/3 rated horsepower. 4 ~ 8 24 4 PC-900-HD 85-202-024 309.99
8 ~ 12 33 5 PC-1200-HD 85-202-026 419.99
Other Models Available, 12 ~ 18 50 21 PC-1800-HD 85-202-027† 749.99
Please Call †Ships direct from factory.
Rotary Type Phase Converters
Used In Metalworking & Woodworking Equipment, Etc.
BeNeFITS: APPLICATIONS: FeATureS:
• Causes no interference to radio, • No changing motor or switch gear. • Multi-speed applications.
television or computer equipment. • Heavily loaded applications. • Multi-motor operation.
• Simple installation. • For long, heavy starting loads use • Will produce full rated horsepower and output.
• Quiet operation. the next larger size converter. • Runs virtually any three phase machine
including motor, resistive and inductive loads.
† Ships direct from factory.
MaxiMuM aPPRoxiMaTe MoDeL oRDeR PRiCe
HoRSePoweR
aMPeRage weigHT # # eaCH
Delay Timers For Automatic 1 3.6 35 lbs. RCP-1 85-202-001 $619.99
Start-Up Of Rotary Converters 2 6.8 42 RCP-2 85-202-002 729.99
Available, Please Call 3 9.6 62 RCP-3 85-202-003 839.99
7-1/2 22 105 RCP-7 85-202-007* 1,449.99
Voltage Stabilizers For CNC & 15 42 190 RCP-15 85-202-009* 2,499.99
Voltage Sensitive Equipment 20 54 225 RCP-20 85-202-010* 2,999.99
Available, Please Call *Truck ship only.
Material Directory, Spindle Speed, Chip Load & Feed Rate Calculator

Guaranteed to save
time and money

BeNeFITS: FeATureS:
• No more mathematical computations. Select The Following And The Recommended
• Increase tool life and productivity. RPM And Feed Rate Are Automatically Displayed:
• Decrease breaking and burning up of • Material to be machined.
expensive cutting tools. • Operation to be performed.
• Eliminate the hassle of calculating • Tool diameter to be used.
proper RPM's for optimum tool life. • Number of cutting tips.
• Tap drill sizes in English & metric,
coarse & fine, and surface foot &
surface meter calculations. ♦ Limited Supply. MoDeL oRDeR PRiCe
#
#
eaCH
Pro/Calc 57-013-000 $69.99