Page 833 - All Industrial Tool Supply | General Catalog

Toolmakers & Sine • VISES
831

Hi-Precision Toolmakers Screwless Vises
Quick Acting Type

The “no-rise” jaw construction exerts a continual downward pressure on
the workpiece, thus avoiding “raise” which is common to most vises
Features:
[Q31] • Squareness and parallelism of the
Jaw Jaw OVerall OVerall Jaw MOdel Order Price vise is approximately ±.0002" on
widTH OPening lengTH HeigHT HeigHT # # eacH critical sides. MODEL #PV-200
2" 3-1/8" 5-1/2" 2" 1" PV-100 61-410-100 $109.99 • Hardened and stabilized.
3 3-3/4 7 2-1/2 1-3/8 PV-200 61-410-200 156.79 • Precision ground to a mirror finish.
Precision Screwless Sine Vise Precision Sine Vises

aPPLICatIONs: Features:
• Provides a quick and accurate means • Made of high carbon steel.
of holding a workpiece at an angle for • Subject to rigid heat-treatment.
machining, drilling or grinding. • Provides a close tolerance of .0002"
(.005mm) for both parallelism
Features: and squareness.
• Square and parallel within .0002". • Jaw can be opened or closed without
• Center distance of rolls: 5.000" unbolting from work surface.
within .0002"
• Made of hardened solid steel.
Jaw Jaw Jaw ViSe MOdel Order Price
widTH dePTH OPening lengTH # # eacH
diMenSiOnS Jaw Jaw weigHT MOdel Order Price 2" 1" 2-1/2" 5-3/8" V555 57-109-060 $93.79
l x w x H caPaciTy dePTH # # eacH 3 1-1/4 4 7-5/8 V565 57-109-062 142.49
8" x 3" x 4.3" 4-3/4" 1-1/2" 20 lbs. 235-315 57-109-050 $184.79 4 1-5/8 5 10 V575 57-109-064 231.49
Precision Sine Vises

BeNeFIts: Features:
• Small angles can be set easily and • Made of hardened steel.
accurately by using standard gage • One locking strap included with each vise.
block sets because of the built in • Moveable jaw pulls into base at 45° to 60° to ensure maximum
0.200" minute steps. holding power and hold-down force, eliminating tilting and lifting.
• SineSet system compatible.
®
diMenSiOnS cenTer diSTance Square & Jaw Jaw weigHT MOdel Order Price
l x w x H Of rOllS Parallel caPaciTy HeigHT # # eacH
7-1/2" x 3" x 3-5/8" 5.000" within .0002" .0002" 4-3/4" 1-5/16" 17 lbs. SV-337 57-109-110 $822.99
11 x 4 x 4-5/8 10.000 within .0002 .0003 7 1-7/16 39 SV-411 57-109-111 1,344.99
The Super Precision Toolmakers Vise

Precision ground internal areas
assure constant accuracy

aPPLICatIONs: Features:
• Can be used on base or either side. • Precision ground on the front end, rear end, both sides, the top and bottom.
• Hardness: Rc 55 - 60
[Q31] • Accuracy is approximately ±.0002" on all critical sides.
Jaw Jaw Jaw OVerall OVerall MOdel Order Price • V-groove of 90° is provided for holding round or square parts,
widTH dePTH OPening lengTH HeigHT # # eacH both vertically and horizontally.
2-7/16" 1-1/8" 3" 7-1/8" 2-7/16" 77T 61-430-001 $133.79 • Jaws are hardened and ground.
Precision Toolmakers Vise

Clamping slots
provided
aPPLICatIONs: Features:
• For inspection, precision jig boring, • All surfaces are hardened and precision • Hardened and ground
grinding and other operations where ground square and parallel to an dovetail slide eliminates
precise holding is necessary. accuracy of ±.0004". “lift” and ensures
• Ground “V” way. consistent accuracy.
[Q32-T] • Base and front jaw are of
Jaw Jaw OVerall OVerall MOdel Order Price one piece all steel construction.
widTH OPening lengTH HeigHT # # eacH
2-3/8" 2-3/16" 6-1/4" 1-3/4" 466-000 TM 61-420-000 $89.99