Page 10 - Aloris Catalog
P. 10
QUICK CHANGE DRILLING HOLDERS
AXA SERIES
#35 DOVETAIL CHUCK HOLDER ORDER # AXA-35
The uniquely designed dovetail chuck holder permits quick and accurate
mounting of drills, reamers, taps, boring bars, etc., and feed by means of PRICE EA. $247.00
your lathe’s carriage power drive–it eliminates tailstock mounting and tailstock
drive. The Aloris chuck holder offers all of the quick-change, repeat positioning
accuracy and high-rigidity features found in all Aloris precision dovetail holders. A CHUCK CAPACITY
The chuck is mounted in a recessed position for minimum overhang,
permitting use of the entire usable length of the tool. Available in capacities up 1
3
to /4-in. Dovetail holder supplied complete with chuck and key. 2 0 – /2
#5C 5C COLLET HOLDER ORDER # AXA-5C
Can be used with a variety of shank tools: drills, reamers,
C. bores, taps, end mills, boring bars and other tools. PRICE EA. $163.00
Collet not included.
A A B COLLET SIZE
B
7 15 5C
1/8 /16
#5, #53, MORSE TAPER HOLDER PRICE EA. $94.00
ORDER # AXA-5
Drills with carriage by using power feed instead
#54, #55 of tail stock. Easily centered.
A B TAPER HOLE SIZE
3 1 #2 M.T.
/ 4 1 /2
ORDER # AXA-53
PRICE EA. $117.00
A B TAPER HOLE SIZE
3 1 #3 M.T.
/ 4 1 /2
DRILLING & BORING HOLDER
#21 Combines drilling and boring operations in a single unit. Used with the Aloris ORDER # AXA-21
super precision tool post, the holder is simply switched – in seconds – from PRICE EA. SPECIAL ORDER
one dovetail to the other. Repeat positioning accuracy of .0001 inch is
assured at all setting and adjustment points. A standard Morse Taper
accommodates a wide range of drill diameters, permitting drilling by carriage A B D TAPER HOLE SIZE
and power feed instead of tailstock. The boring bar, reamer, tap or other
straight shank tool can be quickly released and removed from the holder. 7 3 3 #3 M.T.
/8 1 / 4 / 4
HEIGHT ADJUSTMENT ASSEMBLY
ORDER # AXA-HA*
PRICE EA. $12.60
#44 BREECH-LOADING TAPER SOCKETS AND HOLDERS
…offers all of the advantages of the well known series 42 quick-change super-precision boring bar holder; with the addition of a gravity latch which allows the holder to accept the
new breech-loading AMS Morse taper sockets shown below.
The latch provides positioning accuracy, prevents turning of the taper socket, and assures rigidity. The breech or back-end loading feature of the AMS
Morse taper socket, reduces tool changeover time because the cross-slide remains fixed, eliminating re-centering.
The latch does not interfere with the holder’s ability to accept Aloris series BB__ boring bars, with or without keyed lock stop rings, or any
round shank tools.
A flick of the Aloris tool post handle locks both the holder and taper socket (or boring bar) in working position in one fast operation. Precise
height adjustment is set and locked by means of a knurled stop and lock-nut on the holder, and positive repeat positioning accuracy to
within 0.0001 inches is assured. Breech-loading taper sockets and holders shown on page 9.
NOT FOR PISTON TYPE TOOL POST
series 44
SPECIAL ORDER # CXA-44 SPECIAL ORDER # CA-44
holders
A B C D A B C D
1
1" 3 / 4 2" 1" 1 / 8 4 / 4 2 / 4 1"
1
3
1
Page 8