Page 254 - Techniks Catalog 2017

MagVISE Injection Mold Clamping Magnets

Features
• Position & clamp in just minutes!
• Proximity sensors ensure position
• Dual controls lock-out machine
during operation for safety
Benefits
• Reduce setup & change-over time
• Increase machine capacity 20%
• Greatly increase productivity by
just changing clamping method

Magnetic mold clamping is much faster than other methods to save machine time.
Injection-mold magnets are quickly times. Also, machine capacity in-
replacing traditional mold clamping creases by an average of 20% because
methods world-wide. The investment PIM magnets require less room in the
in PIM magnets is quickly repaid by machine cube. Call us for custom size
faster mold setup and change-over magnets.

Watch the video demo
at this url:
http://ow.ly/tajls
Proximity sensors ensure correct positioning. Controls require operator to use both hands.

Load and install PIM magnet with bolts PIM & controls integrate with your machine. Mold is held perfectly, & change-over is fast.

Model Face (L x W x H) Max Temp (F) Holding Power Pole Size (mm) Power Supply
EEPM-1200PIM 59" x 59" x 2.75" 248˚ 185,188 lbs. 92 x 92 35A, 480V single phase
EEPM-950PIM 57" x 41.3" x 2.75" 248˚ 148,150 lbs. 92 x 92 30A, 480V single phase
EEPM-400PIM 41.3" x 25.6" x 2.75" 248˚ 52,910 lbs. 92 x 92 40A, 480V single phase

252 Call 800.597.3921 or 317.803.8000 for a fast friendly quote. • Fax: 317.803.8001