Page 271 - Techniks Catalog 2017

Reduce Your Small Parts Deburring Costs

The sPINner deburrs both internal and external part features.

The sPINner deburrs:

slots
drill
holes

threads
cross
The sPINner machine quickly batch deburrs dozens or even hundreds of holes
small, precision parts produced on machining centers, swiss-type screw
internal
machines, and lathes. This includes ferrous and non-ferrous parts pro- threads
duced for the medical, electronics, and other industries.

The sPINner’s unique, stainless steel pin media removes light burrs and
internal
flash without harming the part. Because the media is magnetically acti- cavities
vated it can deburr internal cavities, slots, holes, and even blind holes. All
parts are automatically demagnetized at the end of the cycle.

Deburring setup and machine operation

1. Setup your deburring contain- 2. Put your pin media and parts into 3. Set the time, speed and dura-
ers on the sPINner. Use multiple container and fill with water until tion and press the start button.
containers to increase capacity parts are submerged. Add PFS-747 The sPINner alarm will sound
if needed. deburring solution 50:1 ratio. when deburring is complete.

Typical deburring duration is 10-20 minutes. Each sPINner includes
adjustable speed & intensity controls with programmable timers
for each direction.

Speed / Intensity
Control with
LED display

See the sPINner
EHD-728 Programmable Timers Cycle Start Power in action on our
control shown (clockwise & counter clockwise) Cycle Stop youtube channel.

http://ow.ly/X03Nc

We stand behind all our products with our 100% Satisfaction Guarantee • www.techniksusa.com 269