Page 598 - Tungaloy Catalog
P. 598
Selection Guide for TAC Mills Shoulder Milling
Work materials
ap
Economical
Shoulder Steel Stainless Cast Iron Superalloys
Milling 9-57
Innovative shoulder milling series
with 3 cornered inserts.
ap
Pitch Number of inserts
Diameter Coarse
ø.500 1 Max. ap: 90°
TPA 06 = .236"
ø.625 2 TPA 10 = .394"
ø.750 3 TPA 15 = .590"
ø1.00 2/4
TPA
ø1.25 2/3 Clamping Air hole Adjusting
ø1.50 2/3/4 Screw -
ø2.00 4 Wiper Shank type Close pitch
Shell Mill - -
ø2.00 4/8 Variations of inserts
ø2.50 5/6 General purpose MJ
ø3.00 6/7
ø4.00 7/8 Accuracy
ø5.00 8 M
EPA ø6.00 10
9
Work materials
General T/EPW13
priority Steel Stainless Cast Iron Non-ferrous TAC Mills
on low 9-62
cutting force
Uniquely designed cutting edge
geometry ensures free cutting
action.
Can suppress chatter in slotting. 90°
Improved shoulder straightness. ap
Max. ap: .394 in
Face Mills Clamping Air hole Adjusting
Pitch Number of inserts Screw -
TPW13 Extra
Diameter Standard Close Close Wiper Shank type Close pitch
ø2.0 3 4 5 -
ø3.0 4 6 8 Variations of inserts
ø4.0 5 7 10 General purpose MJ
ø5.0 6 8 12 Low resistance ML
ø6.0 8 12 15 For stainless steels MS
For aluminum alloys AJ
EPW13 Accuracy
M, G
9–11