Page 563 - All Industrial Tool Supply | General Catalog
P. 563
Turning Inserts • CERATIZIT
561
Turning Inserts
Features:
• Underground molded chipbreaker, with hole and standard hone.
• Negative rake but produces positive rake cutting action.
• Used in pin type holders - non standard radii not available.
Scallop
• Chipbreaker allows a wide range of feed rates from light to heavy.
• Scallop design allows minimal contact between the chip and insert resulting in a cooler cutting tool and extended tool life.
InserT ChIpbreaker Grade I.C. ThICkness radIus WorkpIeCe MaTerIal order ________prICe eaCh________
# p M k s n h # 1-9 pCs. 10-29 pCs. 30+ pCs. CNMG
CnMG/CnMZ
CNMG432 — NP1000 1/2" 3/16" 0.031" X X X 22-315-432 $15.77 $13.40 $11.66
CNMG432-S Scallop NP1000 1/2" 3/16" 0.031" X X X 22-345-432 13.28 11.29 9.82
CNMG542 — NP1000 5/8" 1/4" 0.031" X X X 22-315-542 16.29 13.84 12.04
CNMG642 — NP1000 3/4" 1/4" 0.031" X X X 22-315-642 31.45 26.73 23.25 DNMG
CNMG643-S Scallop NP1000 3/4" 1/4" 0.047" X X X 22-345-643 31.45 26.73 23.25
CNMZ432 — NP1000 1/2" 3/16" 0.031" X X X 22-321-432 13.32 11.32 9.85
CNMZ643 — NP1000 3/4" 1/4" 0.047" X X X 22-321-643 30.29 25.75 22.40
dnMG/dnMZ
DNMG542 — NP1000 5/8" 1/4" 0.031" X X X 22-327-542 $29.45 $25.03 $21.78
DNMG543 — NP1000 5/8" 1/4" 0.047" X X X 22-327-543 29.45 25.03 21.78
DNMZ432 — NP1000 1/2" 3/16" 0.031" X X X 22-331-432 18.38 15.63 13.59 SNMG
snMG/snMZ
SNMG322 — NP1000 3/8" 1/8" 0.031" X X X 22-305-322 $15.68 $13.33 $11.60
SNMG432 — NP1000 1/2" 3/16" 0.031" X X X 22-305-432 15.57 13.24 11.51
SNMG432-S Scallop NP1000 1/2" 3/16" 0.031" X X X 22-348-432 13.16 11.19 9.73
SNMG643 — NP1000 3/4" 1/4" 0.047" X X X 22-305-643 28.74 24.43 21.26
SNMG644-S Scallop NP1000 3/4" 1/4" 0.063" X X X 22-348-644 20.19 17.16 14.93 TNMG
SNMZ432 — NP1000 1/2" 3/16" 0.031" X X X 22-311-432 10.41 8.85 7.70
SNMZ643 — NP1000 3/4" 1/4" 0.047" X X X 22-311-643 21.40 18.19 15.83
spG
SPG422 — NP1000 1/2" 1/8" 0.031" X X X 22-382-422 $18.19 $15.46 $13.45
SPG422 — N60 1/2" 1/8" 0.031" X 22-381-422 12.26 10.42 9.07
TnMG
TNMG222 — NP1000 1/4" 1/8" 0.031" X X X 22-287-222 $8.46 $7.19 $6.25 TPG N22
TNMG321 — NP1000 3/8" 1/8" 0.016" X X X 22-287-321 9.05 7.69 6.69
TNMG322 — NP1000 3/8" 1/8" 0.031" X X X 22-287-322 8.77 7.46 6.49
TNMG322-S Scallop NP1000 3/8" 1/8" 0.031" X X X 22-351-322 8.86 7.53 6.55
TNMG332-S Scallop NP1000 3/8" 3/16" 0.031" X X X 22-351-332 9.49 8.06 7.02
TNMG431 — NP1000 1/2" 3/16" 0.016" X X X 22-287-431 15.35 13.05 11.35
TNMG432 — NP1000 1/2" 3/16" 0.031" X X X 22-287-432 16.67 14.17 12.33
TNMG433-S Scallop NP1000 1/2" 3/16" 0.047" X X X 22-351-433 13.12 11.15 9.70 TPU NP1000
TNMG434 — NP1000 1/2" 3/16" 0.063" X X X 22-287-434 15.01 12.76 11.10
TNMG542 — NP1000 5/8" 1/4" 0.031" X X X 22-287-542 26.11 22.20 19.31
TNMG544 — NP1000 5/8" 1/4" 0.063" X X X 22-287-544 22.10 18.79 16.34
TpG/Tpu
TPG222 — NP1000 1/4" 1/8" 0.031" X X X 22-388-222 $18.20 $15.47 $13.46
TPG322 — N22 3/8" 1/8" 0.031" X X X X 22-386-322 11.08 9.41 8.19
TPG322 — NP1000 3/8" 1/8" 0.031" X X X 22-388-322 17.66 15.01 13.06
TPG322 — N60 3/8" 1/8" 0.031" X 22-387-322 11.33 9.63 8.38
TPG432 — N22 1/2" 3/16" 0.031" X X X X 22-386-432 17.47 14.85 12.92
TPG432 — NP1000 1/2" 3/16" 0.031" X X X 22-388-432 24.66 20.96 18.24
TPG432 — N60 1/2" 3/16" 0.031" X 22-387-432 17.47 14.85 12.92
TPU322 — NP1000 3/8" 1/8" 0.031" X X X 22-391-322 13.27 11.28 9.81
TPU322 — N60 3/8" 1/8" 0.031" X 22-390-322 6.75 5.74 4.99
TPU432 — NP1000 1/2" 3/16" 0.031" X X X 22-391-432 18.99 16.14 14.04
TPU432 — N60 1/2" 3/16" 0.031" X 22-390-432 15.77 13.40 11.66
WnMG
WNMG432-S Scallop NP1000 1/2" 3/16" 0.031" X X X 22-357-432 $14.12 $12.00 $10.44
• Underground molded chipbreaker, with hole and standard hone. Scallop
• Negative rake but produces positive rake cutting action. • Chipbreaker allows a wide range of feed rates from light to heavy.
CARbIDE TURNING INSERT GUIDE
• Used in pin type holders - non standard radii not available. • Scallop design allows minimal contact between the chip and insert resulting in
a cooler cutting tool and extended tool life.
GRADE INDUSTRIAL CLASSIFICATION RECOMMENDED MACHINING APPLICATIONS
A general purpose grade with broad application on cast irons and high temperature alloys. Suitable for use in
N22 C-2
solid carbide end mills and drills. For machining cast iron, non-ferrous & high temperature alloys.
Recommended for general-purpose milling and machining, moderate chip loads on roughing operations of
N60 C-6 moderate interruptions, also long, dry cuts. Good resistance to shock and greater wear resistance than N55.
For machining steel.
Medium to heavy roughing over a variety of materials including cast iron, cast steel, carbon steel, alloy and
hardened steels, and stainless steels in the 300-400 series. Excellent life at speeds of 325 to 650 SFM with
NP1000 —
greater resistance to edge wear. Also added strength provided by a special Newcomer sinter-hip enhancement.
CVD coated grade.