Page 729 - All Industrial Tool Supply | General Catalog

Live Centers • TURNING
727

Revolving Tailstock Centers

MODEL #42776
Benefits: feAtures:
• Hardened and ground for • Triple bearing method.
long service life. • High runout accuracy.
• Heavy duty.
• High speeds.
• 60° points.
• Made in Germany.

Type 604H Body HARdened & GRound
MoRSe MAxiMuM MAxiMuM __________diMenSionS__________ ModeL oRdeR pRiCe
TApeR ConCenTRiC eRRoR RpM A B d K # # eACH
3 0.0002" 5,000 3.13" 2.362" 0.984" 1.22" 42776 63-301-782 $419.99 MODEL #58670
4 0.0002 3,800 4.035 2.756 1.26 1.614 42175 63-301-783 449.99
5 0.0002 3,000 5.079 3.543 1.575 1.988 42843 63-301-784 664.99
Type 604HVL WiTH exTended LiVe CenTeR
MoRSe MAxiMuM MAxiMuM __________diMenSionS__________ ModeL oRdeR pRiCe
TApeR ConCenTRiC eRRoR RpM A B d J K # # eACH
3 0.0002" 5,000 3.76" 2.362" 0.984" 0.472" 1.85" 58670 63-301-786 $429.99
4 0.0002 3,800 4.508 2.756 1.26" 0.551 2.087 58671 63-301-787 459.99
5 0.0002 3,000 5.65 3.543 1.575" 0.63 2.559 58672 63-301-788 691.99
Spring Loaded Live Centers
Super Accurate And Spring Loaded

Available In Jarno, Brown & Sharpe
& Straight Shanks, Please Call
Benefits: APPLiCAtiOns:
SpindLe
RAdiAL
SHAnK diAMeTeR LoAd CApACiTy ModeL oRdeR pRiCe • Low profile design gives less • Automatic thrust adjustment: spring
#
loaded spindle compensates for work
overhang, greater load capacity and
eACH
#
MoRSe TApeR SHAnK increased rigidity. expansion or contraction, maintains
2 MT 0.378" 1,400 lbs. 17102 69-205-502 $267.49 • Smaller turning radius allows higher constant tailstock thrust and
3 MT 0.558 1,850 17103 69-205-503 307.79 RPM's lower bearing speeds. eliminates jamming
4 MT 0.686 2,500 17104 69-205-504 374.49 • Needle bearings distribute stress for
5 MT 1.075 3,750 17105 69-205-505 535.39 up to 6,800 lbs. radial load capacity, feAtures:
STRAiGHT SHAnK extend life 2 to 3 times that of • Grease hole.
5/8" 0.375" 1,400 lbs. 17301 69-205-510† $307.79 conventional live centers and provide • Tampered steel spring.
†Ships direct from factory. turning accuracy up to 0.0001".
10° Bell Head Live Centers & Adapters
All 5 adapters interchangeable
on one 10° spindle
APPLiCAtiOns:
• A set of (5) interchangeable adapter heads or segments, precision ground to a
standard 60° angle, fit on the tapered spindle to accommodate a wide choice of
work diameters with minimal overhang.
• For holding castings, forgings, large diameter tubing, cylinders and pipe.
10° LiVe CenTeRS #1 #2 #3 #4 #5
MoRSe ModeL oRdeR pRiCe feAtures:
TApeR # # eACH* • New bell head design features concentric
2 MT LBH-2 69-205-602 $266.69 live center with special 10° taper spindle
3 MT LBH-3 69-205-603 304.49 (instead of standard 60° point).
4 MT LBH-4 69-205-604 371.69
5 MT LBH-5 69-205-605 533.39
*Prices do not include adapters. Jarno, Brown & Sharpe & Straight Shank 10°
Live Centers Also Available, Please Call
BeLL HeAd AdApTeRS

#1 #2 #3 #4 #5

MoRSe diMenSionS oRdeR pRiCe diMenSionS oRdeR pRiCe diMenSionS oRdeR pRiCe diMenSionS oRdeR pRiCe diMenSionS oRdeR pRiCe
TApeR A B # eACH A B # eACH A B # eACH A B # eACH A B # eACH
2 MT .248" 1.310" 69-205-552 $125.99 1.240" 1.822" 69-205-562 $125.99 1.751" 2.333" 69-205-572 $161.69 2.262" 2.844" 69-205-582 $161.69 .125" 0.756"69-205-592 $188.99
3 MT .350 1.832 69-205-553 161.69 1.716 2.576 69-205-563 161.69 2.460 3.320 69-205-573 188.99 3.204 4.064 69-205-583 188.99 .187 1.116 69-205-593 218.39
4 MT .358 2.272 69-205-554 188.99 2.166 3.246 69-205-564 188.99 3.140 4.220 69-205-574 218.39 4.114 5.194 69-205-584 249.89 .228 1.372 69-205-594 285.59
5 MT .514 3.328 69-205-555 218.39 3.209 4.797 69-205-565 218.39 4.598 6.186 69-205-575 249.89 — — — — — — — —