Page 842 - All Industrial Tool Supply | General Catalog
P. 842
VISES • Machine & Accessories
840
DoveLock Dove Tail 5-axis Vise
™
BeNeFITS:
• DoveLock fits easily into most any machine table with
pre-configured hole patterns.
FeATureS:
• Manufactured from 4140 pre-hardened steel, the DoveLock
™
maintains part rigidity and reduces deflection.
• Deflection is reduced by the unique Kurt design which features the
clamping screw location high up in the clamping envelope.
• More anti-deflection control is achieved by the movable jaw slide
which is retained within the stationary jaw.
• Full 1/2" stroke making part prep easier than the other vises.
• Embedded locating pin keeps part location accurate when applying
RiseR base aTTached To dT20 Vise
side load pressure.
Model #dT20 • 2.50" tall vise body.
• 1.250" thick riser base is easily stackable.
riSerS
MoDeL orDer Price
heighT DiaMeTer WeighT
# # each
Model #dT20-1 1.250" 4.47" 5 lbs. DT20-1 61-421-022 $137.00
ViSe
JaW JaW JaW cLaMPing hex ViSe baSe baSe MoDeL orDer Price
WiDTh oPening heighT force Size STroKe heighT heighT DiaMeTer WeighT # # each
2.000" 1.688" 0.125" Up To 4,000 lbs. 0.312" 0.500" 2.500" 1.250" 4.47" 8 lbs. DT20 61-421-021 $549.00
Loc-Jaw System
For 4th & 5th Axis Machining
BeNeFITS: INCLudeS: TechnicaL DaTa:
• The base is configured with a bushing Jaw Sets Torque hoLDing
for precise location and repeatability. A • (2) Jaws. (fT./LbS.) force
centering disk is provided for mounting • (4) Grips & screws. 10 2,000 lbs.
directly to an indexer. Rail Set 15 3,000 lbs.
• (4) Rails, screws & dowel pins. 20 4,000 lbs.
APPLICATIONS: 25 5,000 lbs.
• For 4th & 5th axis machining that 30 6,000 lbs.
requires no material preparation with *Maximum 25 lbs. torque on
this new unique design. material harder than 40RC.
FeATureS: Loc-Jaw Extension Kit #14525 Available,
• The Loc-Jaw has a clamping range Loc-JaW SySTeM Please Call For More Information
of 0.5" to 4.0" (1 Meter with optional
extension kit #14525), capable of JaW JaW heighT LengTh WiDTh WeighT MoDeL orDer Price
penetrating .060" deep per gripper and WiDTh oPening # # each
produces over 6,000 lbs. of holding force. 2.5" 0.5" to 4" 6.2" 5" 5.5" 19 lbs. 14500 61-421-450 $1,199.99
• The low profile grippers hold only .125" SPare ParTS
allowing full access to all work surfaces MoDeL orDer Price
including the bottom face. DeScriPTion # # each
• The rails and gripper towers are Support Bolt # 1 (M10 x 45mm) 14501 61-421-451 $2.49
serrated to provide a solid and Support Bolt # 2 (M10 x 65mm) 14502 61-421-452 3.49
easily adjustable base. Support Bolt # 3 (M10 x 90mm) 14503 61-421-453 3.59
• A single support bolt is used to reinforce Support Bolt # 4 (M10 x 110mm) 14504 61-421-454 11.99
the gripper towers for rigidity and Knife Edge Grips (2 pc pack) 14505 61-421-455 49.99
increased workholding capacity. Blunt Edge Grips (2 pc pack) 14506 61-421-456 49.99
Knife Edge Jaw Set 14510 61-421-457 599.99
Blunt Edge Jaw Set 14515 61-421-458 599.99
Rail Set 14520 61-421-459 399.99
Vise Mounting Kit
Includes FREE
TTC T-Slot Cleaner! APPLICATIONS: FeATureS: INCLudeS:
• For mounting your machine vise to • Black oxide finish. • (2) 625-TN 5/8" T-slot nuts.
any Bridgeport type milling machine • Heat treated steel. • (2) 40704 3" clamping studs.
with a 5/8" T-slot. • (2) 12-FN 1-1/8" flanged nuts.
orDer Price
# Per SeT
99-998-009 $14.29