Page 10 - Fullerton Tool Catalog
P. 10
END MILLS
Weldon Flats
48-Hour 12
Just in Time PIECES
Delivery
5:00 PM EST OR LESS
Order Deadline
The Advanced Performance Weldon Flat (AF) and the Standard Weldon Flat (WF) are essentially
the same, but the length of the Weldon Flat to the cutting end of the tool is different. The AF is
measured from the flute washout to the flat. This guarantees that the flute or flute washout will
not be inside of the holder. If the flute or flute washout is inside the tool holder, the chips can
pack into the holder and can cause the tool to break.
Standard Weldon Flat (WF) V
W 45 TYP
V W X Y
Shank Diameter
±.015 ±.001 ±.004 ±.031
1/8 .5000 .1560 .1050 - X DIA
3/16 .6875 .1560 .1500 -
1/4 .7812 .1870 .2150 - Single Weldon Flat
5/16 .7812 .2500 .2750 -
Advanced 3/8 .7812 .2810 .3200 - V
Performance 7/16 .7812 .3310 .3780 -
1/2 .8906 .3310 .4350 - Y W 45 TYP
9/16 .9200 .3310 .5000 -
5/8 .9531 .4010 .5550 -
3/4 1.0156 .4560 .6700 - X DIA
7/8 1.0156 .4560 .8050 .5000
1 1.1406 .5160 .9200 .5000
1 1/4 1.1406 .5160 1.1510 .5000 Double Weldon Flat
Advanced Performance Weldon Flat (AF)
Z W X U
Shank Diameter
Z ±.015 ±.001 ±.004 ±.031
3/8 .8310 .2810 .3200 -
W
45 TYP 7/16 .8310 .3310 .3780 -
1/2 .9400 .3310 .4350 -
5/8 1.1580 .4010 .5550 -
X DIA
3/4 1.0500 .4560 .6700 -
Single Advanced Performance Weldon Flat 7/8 1.0500 .4560 .8050 -
1 1.1700 .5160 .9200 .9000
Z 1 1/4 1.1700 .5160 1.1510 .9000
U 1 1/2 1.1700 .5160 1.4010 .9000
W 45 TYP
For new applications, we recommend the AF.
X DIA
For existing applications using our WF, we
Double Advanced Performance Weldon Flat recommend staying with our WF unless issues
have occurred.
*We cannot guarantee or accept the return of any End Mill with a Flat put on by the customer.
8 Visit fullertontool.com for the most up to date information.