Page 15 - Rex-Cut Call 714-897-1700

SMOOTH TOUCH WHEELS

Designed to offer a greater amount of flexibility and operator feel when compared to our standard line of cotton fiber
Type 1 products. Excellent at finishing edges of cast or machined parts without changing part geometry.

METALS TIP
Stainless steel - Aluminum - Exotics - Mild steel - Brass While in use, allow the
wheel to do the work.
BENEFITS Too much pressure will
Maximum operator control cause the wheel to
Debur edges without altering part shape generate unwanted heat
and potential back transfer.
APPLICATIONS Use optimum speed for
best results.
Light grinding - Light deburring - Blending - Finishing
Ideal for use on robotic applications RESOURCES

SPECIFICATIONS To watch a demo video
of Smooth Touch in
Grain Size action, visit
Coarse - Green rexcut.com/smoothtouch
Medium - Red
Fine - Yellow

AVAILABILITY

DIAMETER X THICKNESS X ID MAX RPM OPTIMUM RPM
COARSE MEDIUM FINE
inch mm All Grits
54 Grit 80 Grit 120 Grit
2 x 1/8 x 1/4 50 x 3 x 6 26,500 30,000 30,000 12,000
2 x 1/8 x 3/8 50 x 3 x 10 26,500 30,000 30,000 12,000
2 x 1/4 x 1/4 50 x 6 x 6 21,500 24,000 24,000 12,000
2 x 1/4 x 3/8 50 x 6 x 10 21,500 24,000 24,000 12,000
2-1/2 x 1/8 x 1/4 65 x 3 x 6 21,500 24,000 24,000 10,000
2-1/2 x 1/8 x 3/8 65 x 3 x 10 21,500 24,000 24,000 10,000
2-1/2 x 1/4 x 1/4 65 x 6 x 6 17,500 19,000 19,000 10,000
2-1/2 x 1/4 x 3/8 65 x 6 x 10 17,500 19,000 19,000 10,000
3 x 1/8 x 1/4 75 x 3 x 6 18,000 20,000 20,000 10,000
3 x 1/8 x 3/8 75 x 3 x 10 18,000 20,000 20,000 10,000
3 x 1/4 x 1/4 75 x 6 x 6 14,500 16,000 16,000 10,000
3 x 1/4 x 3/8 75 x 6 x 10 14,500 16,000 16,000 10,000
4 x 1/8 x 1/4 100 x 3 x 6 14,000 15,500 15,500 8,000
4 x 1/8 x 3/8 100 x 3 x 10 14,000 15,500 15,500 8,000
4 x 1/4 x 1/4 100 x 6 x 6 11,500 12,500 12,500 8,000
4 x 1/4 x 3/8 100 x 6 x 10 11,500 12,500 12,500 8,000
6 x 1/8 x 1/4 150 x 3 x 6 6,000 6,000 6,000 2,500
6 x 1/8 x 3/8 150 x 3 x 10 6,000 6,000 6,000 2,500
6 x 1/4 x 1/4 100 x 6 x 6 6,000 6,000 6,000 2,500
6 x 1/4 x 3/8 100 x 6 x 10 6,000 6,000 6,000 2,500
TESTIMONIAL
“While choosing an abrasive to use in a robotic deburring cell to finish the edge of
a turbine blade, the Smooth Touch wheel outperformed non-woven nylon wheels
significantly. It was able to obtain the desired finish without changing the part
geometry as measured by a laser sensor.”
- Normand Stoycheff, Robotic Finishing Expert at AV&R Vision & Robotics Robotics Die Grinder

www.rexcut.com n info@rexcut.com n phone: 1-800-225-8182 12