Page 140 - Techniks Catalog 2017

CAT40, 50 DualDRIVE for Dual-Contact Spindles

Features
• Techniks Certified for dual-contact spindles
• Grips shank up to 5x tighter than ER 40 holders
• Nut seats against the flange when properly
tightened (prevents overtightening)

See an on machine demonstration
video of DualDRIVE compared to
standard toolholders at:
http://ow.ly/sUOqL
TECHNIKS CERTIFIED
3/4" chuck shown with optional coolant cap Torque Tested to 5x Tighter Grip
and Black Gold coolant ring.
Techniks Milling Chucks provide up to 5x tighter
grip on the shank than other manufacturer's
l2
ER 40 holders with an uncoated nut.

d1 d2 Toolholder Type Shank Spins At:
Other ER 40 holders 100 ft/lbs
Techniks 3/4" milling chucks 350 ft/lbs
Techniks 1" milling chucks 425 ft/lbs
l1
L Techniks 1-1/4" milling chucks 500 ft/lbs
CAT40, CAT50 Milling Chucks with DualDRIVE

Part No. Description L l1 l2 d1 d2 Holding Power
43.463G.64.400 CAT40 x MLD 3/4" - 4" DualDRIVE 6.69" 4.00" 2.38" 0.75" 2.24" 350 ft/lbs
43.463G.68.400 CAT40 x MLD 1" - 4" DualDRIVE 6.69" 4.0" 2.23" 1.0" 2.36" 425 ft/lbs
43.463G.72.420 CAT40 x MLD 1-1/4" - 4.2" DualDRIVE 6.89" 4.20" 2.38" 1.25" 2.80" 500 ft/lbs
44.463G.64.400 CAT50 x MLD 3/4" - 4" DualDRIVE 8.00" 4.00" 2.38" 0.75" 2.24" 350 ft/lbs
44.463G.68.400 CAT50 x MLD 1" - 4" DualDrive 8.0" 4.0" 2.23" 1.0" 2.36" 425 ft/lbs
44.463G.72.413 CAT50 x MLD 1-1/4" - 4.13" DualDRIVE 8.13" 4.13" 2.38" 1.25" 2.80" 500 ft/lbs

Coolant Cap option for all spindle types

Use coolant cap and Black Gold ring for coolant-thru tools.
• Maximum chip removal, increase feed rates, extend tool life

Use coolant cap with Black Gold ER25 or ER40 cool-
ant rings. Select the coolant ring to fit your shank size.
See page 60
Part No. Description Ring
19496G For 3/4" chuck ER25
Insert Black Gold coolant ring Cap screws onto end of mill- Coolant-thru tool installed
into cap ing chuck 19489G For 1-1/4" chuck ER40

138 Call 800.597.3921 or 317.803.8000 for a fast friendly quote. • Fax: 317.803.8001