Page 141 - Techniks Catalog 2017

BT40, HSK63A, and HSK100A Milling Chucks

Features
• Grips shank up to 5x tighter than ER 40 holders

• Nut seats against the flange when properly tightened
(prevents overtightening)
• CoolBLAST coolant-thru standard on all milling chucks

l2

d1 d2
1-1/4" chuck shown above. Use milling chuck
sleeves (page 140) to change tool shank size.

Each Techniks High-Performance Milling Chuck is inspected,
tested, and certified for quality, accuracy, and holding power. l1
TECHNIKS CERTIFIED
A full lab report is included with each holder. L
BT40 Milling Chucks

Part No. Description L l1 l2 d1 d2 Holding Power
15994G BT40 X MLD 3/4" - 3.15 5.75" 3.15" 1.97" 0.75" 2.22" 350 ft/lbs
15995G BT40 X MLD 1" - 3.15 5.75" 3.15" 2.07" 1.0" 2.36" 425 ft/lbs
15996G BT40 x MLD 1-1/4" - 4" 6.57" 4" 2.62" 1.25" 2.80" 500 ft/lbs

Tightening Retention Wrenches
Stands Knobs pg. 232
pg. 234 pg. 228

For coolant-thru tools
l2 order the coolant ring
that fits your shank size
(pg. 138)
d1 d2

3/4" chuck shown above. Use milling chuck
sleeves (page 123) to change tool shank size. L l1
HSK63A and HSK100A Milling Chucks

Part No. Description L l1 l2 d1 d2 Holding Power
33232G HSK63A X MLD 3/4" - 4" 5.30" 4" 2.01" .75" 2.22" 350 ft/lbs
33236G HSK63A x MLD 1-1/4" - 4.72" 5.98" 4.72" 2.65" 1.25" 2.80" 500 ft/lbs
33252G HSK100A X MLD 3/4" - 4.72" 6.70" 4.72" 2.01" .75" 2.22" 350 ft/lbs
33256G HSK100A x MLD 1-1/4" - 4.72" 6.70" 4.72" 2.65" 1.25" 2.79" 500 ft/lbs

We stand behind all our products with our 100% Satisfaction Guarantee • www.techniksusa.com 139