Page 66 - Techniks Catalog 2017

PowerCOAT ER Collet Nuts and Coolant Nuts

Features
• Increases holding power by 75% Holding Power Testing – ft/lbs
• Balanced to 25,000 RPM
150 _________________________________
• Better rigidity and T.I.R. (runout)
140 _________________________________
See Torque Chart on page 48. 130 _________________________________
PowerCOAT
Nut
120 _________________________________
PowerCOAT ER Collet Nuts 110 _________________________________

Part No. Description D B T Wrench Holding Power ft/lbs 100 _________________________________
Bearing
Nut
90 _________________________________
41111 ER11 PowerCOAT hex nut 19mm 12mm M14 x 0.75 04608
80 _________________________________
41116 ER16 PowerCOAT hex nut 27.5mm 18mm M22 x 1.5 04609 Standard
Nut
70 _________________________________
41120 ER20 PowerCOAT hex nut 34mm 19mm M25 x 1.5 04610 Each nut was tightened to 70 ft/lbs recommended torque before
break-free testing of holding power.
41916 ER16 PowerCOAT slot nut 32mm 18mm M22 x 1.5 04613
41920 ER20 PowerCOAT slot nut 35mm 19.5mm M25 x 1.5 04614 Watch the Holding Power
41925 ER25 PowerCOAT slot nut 42mm 21mm M32 x 1.5 04615 testing video at:
http://ow.ly/sV3UY
41925-L ER25 PowerCOAT slot nut L 42mm 21mm M32 x 1.5 04615
41932 ER32 PowerCOAT slot nut 50mm 23mm M40 x 1.5 04616
41940 ER40 PowerCOAT slot nut 63mm 26mm M50 x 1.5 04617
41950 ER50 PowerCOAT slot nut 78mm 35mm M64 x 2.0 04618
L = Left threaded
PowerCOAT Ultra High-Speed ER Nuts

(balanced up to 70,000 RPM)
Part No. Description D B T Wrench

46111 ER11 high speed hex nut 19mm 11.8mm M14 x 0.75 04608
46116 ER16 high speed slot nut 27.5mm 18.0mm M22 x 1.5 04613
46120 ER20 high speed slot nut 35mm 19.5mm M25 x 1.5 04614
46125 ER25 high speed slot nut 42mm 20.5mm M32 x 1.5 04615 For best performance use a torque wrench and
46132 ER32 high speed slot nut 50mm 23.0mm M40 x 1.5 04616 tighten nut to proper torque specification. Snap
collet into nut before assembly.
46140 ER40 high speed slot nut 63mm 26.0mm M50 x 1.5 04617

Features
• Increases holding power by 75%
• Seals up to 1,500 P.S.I.
• Balanced to 25,000 RPM
• Use with coolant rings pg. 60
PowerCOAT ER Coolant Nuts

Part No. Description D B T Wrench
41616 ER16 coolant slot nut 32 22.5 M22x1.5 04613
41620 ER20 coolant slot nut 35 24 M25x1.5 04614
Coolant ring snaps into the nut
41625 ER25 coolant slot nut 42 25 M32x1.5 04615 to seal the tool shank. (pg. 60)
41632 ER32 coolant slot nut 50 27.5 M40x1.5 04616 For coolant-thru tools.
41640 ER40 coolant slot nut 63 30.7 M50x1.5 04617
64 Call 800.597.3921 or 317.803.8000 for a fast friendly quote. • Fax: 317.803.8001