Page 394 - Tungaloy Catalog
P. 394
Face grooving and traversing
1st choice for Standard feed and DoC
DTF type (2 corner) face grooving 0.200
Depth of cut: ap (inch) 0.078
Unique chipbreaker 0.157 Standard feed
makes chips shorter 0.118 0.016
Handed insert 0.039 0 0.004 0.008 0.012 0.016 0.020 0.024 Feed: f (ipr) 0.012
0.008
Feed: f (ipr)
Groove width: W (inch) 0.004 0 0.118 0.157
0.118 0.157 Groove width: W (inch)
Aluminum wheel machining
Standard feed and DoC
DTA type (2 corner) Full radius type 0.200
Excellent chip control 0.157
0.118
6 For aluminum wheel Depth of cut: ap (inch) 0.078
profiling 0.039
Ground insert 0 0.004 0.008 0.012 0.016 0.020 0.024 Groove width : W (inch)
Parting and Grooving Tools External grooving of hardened steels Standard feed
Feed: f (ipr)
0.236 0.315
For hardened steel cutting
SGN type
(1 corner)
0.0040
Optimum cutting edge
0.0032
shape for grooving of
hardened steels
0.0016
Tight tolerance width for
finishing (W = ±0.001") Feed: f (ipr) 0.0024
0.0008
0 0.079 0.118 0.157
Groove width: W (inch)
6–14