Page 1016 - All Industrial Tool Supply | General Catalog
P. 1016
LOCATORS • Co-Ax Indicators & Spindle Squares
1014
pro-tram System
BeNeFIts: Features:
• Sized perfectly to fit the bed of a 6" • Can be used with a sine bar or
vise allowing you to tram the head to sine plate to adjust the head to
the vise instead of the table. precise angles.
• Guaranteed to be equal to or better • Calibration procedure accounts for
than any other tramming method or any error introduced by worn collets.
spindle squaring device available. • Large 2.2" easy to read indicator face.
• Graduation: 0.001"
aPPLICatIONs: • Indicator repeatability: 0.0002"
MODELs #01-000 & #10-000 MODEL #11-000
• Squares the head of a milling machine • Body made from red anodized
quickly and easily. 6061-T6 aluminum.
INCLudes:
• Calibration gage.
• Padded case.
Shank moDel orDer prICe
DIameter # # eaCh
1/2" 01-000 57-052-060 $124.99
3/8" 10-000 57-052-061 124.99
shOwn In UsE shOwn In UsE 1/4" 11-000 57-052-062 124.99
Spindle Squares
Provides fast and accurate vertical
milling machine tramming Features:
• Ground gaging surface.
• Shank diameter: 3/8"
• 4" (100mm) between contact points.
• Solid steel body construction with durable black oxide finish.
• Fully assembled with two AGD Group 2 dial indicators.
• 6-3/4" (172mm) wide and 5-1/2" (140mm) from the top of shank to the
tip of the contact points.
moDel orDer prICe
range
# # eaCh
0 ~ 0.250" 649-1 57-052-023 $206.99
0 ~ 0.125" 649-5 57-052-024 217.99
MODEL #649-5 0 ~ 2.5mm 649-1M 57-052-025 217.99
2 Dimensional Coaxial Indicator Sets
SpeCIfICatIonS:
Length .................................... 6-7/8" (175mm)
aPPLICatIONs: Shank ..............................3/8" Diameter x 7/8"
• Use the 2D Coaxial Set for accurate component centering and (10mm x 20mm) Long
positioning in most machining applications. Feeler Ball ....................... 1/8" (3mm) Diameter
• The 2D Coaxial indicator can be used at any angle and the dial Dial Readings ........................................... 0-50
remains stationary during the rotation of the machine spindle. Measuring Range ........250" (6mm) Axis Offset
Speed ...............Recommended not to exceed
approximately 800 RPM
Features: Locating Accuracy ..To within .0002" (.005mm)
• Indicator assembly with 1.6" (42.5mm) diameter dial. of true center
• Graduations and revolution counter .0005" (0.01mm). Capacity* ..................Overall range is 5/32-12"
• 3 internal and 3 external feelers. (4-300mm) internal diameter;
• Center point feeler. 0-12" (0-300mm) external diameter
• Restraining arm. *Depends on feelers installed.
• Complete in a fitted case. moDel orDer prICe
DeSCrIptIon # # per Set
Inch 52-710-025 57-030-407 $234.99
Metric 52-710-030 57-030-408 239.89
MK MORSE bandsaw blades are made in the USA & offer a
wide range of M42 bi-metal blades. See pages 414-415.
