Page 1491 - All Industrial Tool Supply | General Catalog

SPECIALTY FLUIDS • Cutting & Tapping Fluids
1488

Tellus S2 V
coolants, lubricants & marking Shell Tellus S2 V uses proprietary additive technology to deliver an oil life over twice the industry standards, excellent pump protection
Extended Temperature Range Hydraulic Fluid

and high efficiency levels. It is a fluid that you can rely on in outdoor or cold environments, as it has been designed to have a wide
operating temperature range. Engineered to maintain its viscosity and performance over the oil-drain interval under severe mechanical
stress and under hot and humid conditions, it is the most popular multigrade hydraulic oil in the Shell Tellus range. It is approved by
leading equipment manufacturers.
FeATureS:
• Limiting fluid degradation can help to prolong oil life.
• Shell Tellus S2 V is designed to help you operate for longer without interruption – for reduced maintenance requirements
and enhanced productivity.
• In the industry-standard oil life test, Shell Tellus S2 V achieved: two and a half times longer oil life than the industry minimum.
• A hydraulic fluid needs to protect, lubricate and transmit power efficiently.
• Shell Tellus S2 V is designed to help maximize productivity by helping equipment to meet or exceed its design capabilities.
• Compared with the industry minimum requirements, it offers: up to 62% faster air release for efficient and precise hydraulic
power transmission, up to 32% better filterability in the demanding industry standard wet test procedure to help reduce
pressure loss for more efficient operation.
Real-World Value Delivery
• Shell Tellus S2 V has documented value delivery in both stationary and mobile hydraulic applications across a wide range
of industries.
• Operators of mobile and exposed plants have increased operational efficiency.
• Open-cast mining and cement plants have reduced maintenance requirements and sludge-formation related stoppages
by switching from competitor oils, stationary equipment such as presses have benefited from the fluid’s greater
temperature-related viscosity stability.
5 Gallon 55 Gallon
model #550026689 model #550026688
Size ViScoSiTy WeighT Model order Price
# # eAch
5 Gallon Pail 32 40.025 lbs. 550026189 81-006-232 $111.99
APPLICATIONS: 55 Gallon Drum 32 432.26 lbs. 550026253 81-006-233 1,155.99
• Mobile and outdoor hydraulic applications – for exposed 5 Gallon Pail 46 40.346 lbs. 550026689 81-006-234 111.99
environments that are subject to wide temperature variations. 55 Gallon Drum 46 435.73 lbs. 550026688 81-006-235 1,155.99
• Precision hydraulic systems – for good control of fluid viscosity 5 Gallon Pail 68 40.666 lbs. 550026269 81-006-236 111.99
over the operating cycle and excellent fluid filterability. 55 Gallon Drum 68 439.2 lbs. 550026736 81-006-237 1,155.99
Morlina S3 BA
®
Special Application Bearing And Circulating Oils

Shell Morlina S3 BA is a premium-quality circulating oil that is designed to give excellent protection against wear and corrosion,
®
and to prolong service life. With its outstanding water separation properties and low foaming tendency, it can help to optimize the
efficiency of your operations. It is especially suitable for systems where water separation is a key issue. In addition, it meets both
the Morgan advanced lubricant specification for super demulsibility and the Danieli super demulse specification.
Offers exceptional protection in
heavily contaminated systems
FeATureS:
• Designed to maintain protective oil films, as its water separation characteristics promote continuous and efficient lubricant
films between moving parts to minimize wear and seizure.
• Prevent corrosion, as its exceptional ability to remove water from the system so that all parts are coated in oil and protected
against corrosion.
• Limiting fluid degradation can help to prolong oil life.
• Designed to help your machinery to operate for longer without interruption – for reduced maintenance requirements and
enhanced productivity.
• Compared with the critical Danieli requirements for super-demulsifiable oils, Shell Morlina S3 BA achieved up to five times
longer oil life for lasting protection, even under severe conditions.
• Designed to provide exceptional water separation characteristics, which makes it highly suitable for hot, wet conditions such
as those found in steel production plants.
• Compared with the industry minimum requirements, it offers up to 37% better free water separation for efficient lubrication
in wet conditions
• It is used extensively in the steel industry to help improve bearing life in challenging environments such as continuous
casting operations.
5 Gallon 55 Gallon
model #550026653 model #550026719
APPLICATIONS:
• Morgoil -type bearing systems – such as those commonly found in steel mills. Model order Price
®
• Heavily contaminated lubrication systems – such as circulating oil systems Size ViScoSiTy WeighT # # eAch
where water separation is a key issue. 5 Gallon Pail 100 40.161 lbs. 550026640 81-006-238 $113.99
• Bearing and circulating oil systems – for use in systems containing plain or 55 Gallon Drum 100 433.746 lbs. 550026641 81-006-239 1,182.99
rolling element bearings. 5 Gallon Pail 150 40.712 lbs. 550026653 81-006-240 113.99
• Industrial gearboxes – for enclosed spur, helical, bevel and worm gearboxes 55 Gallon Drum 150 439.694 lbs. 550026719 81-006-241 1,182.99
where the use of a non-extreme-pressure (EP), rust- and oxidation inhibited oil 5 Gallon Pail 220 40.988 lbs. 550026650 81-006-242 113.99
is approved. 55 Gallon Drum 220 442.67 lbs. 550026692 81-006-243 1,182.99