Page 1729 - All Industrial Tool Supply | General Catalog
P. 1729
Magnetic Lifters • LIFTING & MOVING EQUIPMENT
1727
Coolant Clean Out Tools
APPLICATIONS: FeATureS:
• Safely removes metal chips and debris • Large comfortable handle is attached
from machinery and work areas. to Rare Earth magnets inside the
seam-welded, stainless steel tube. MOdEL #MM1500EZ
• Maximum temperature 180°F (82°C).
TO Clean This TOOl:
• Pull the handle away from the stainless steel tube.
• Collected scrap metal will follow the magnet up the tube until it hits the
stripper washer.
• Once the magnet is past the stripper washer, the magnetic influence will
dissipate and the metal falls off. MOdEL #MM3600EZ
• No need to pull or wipe off collected metal.
mODel OrDer PriCe
DimensiOns WeighT
# # eaCh
1" Diameter x 19.25"L 1.25 lbs. MM1500EZ 63-301-311 $80.59
1" Diameter x 40.25"L 2.75 lbs. MM3600EZ 63-301-312 123.99
magnetic industrial sweeper magnetic shop sweeper
APPLICATIONS: APPLICATIONS:
• Ideal for shop floor, parking • Works on hard floors or carpeted areas.
lots and construction sites. • Ability to clean right up to the edge of
walls or machines and into corners
FeATureS: with its unique wheel design.
• Handle length: 48" • Picks up pins, nails, staples, chips
• Dimensions: 6"W x 13/16"H and more.
• Available in 12", 24" and
36" lengths. FeATureS:
• Dimensions: 18"L x 3/4"W x 40"H
• 3/4" clearance height.
• Easy to clean magnet. material Handling, Storage & BookS
• Helps prevent injuries.
• Shipping weight: 10 lbs.
mODel OrDer PriCe
lengTh WiDTh heigTh WeighT
# # eaCh
12" 6" 13/16" 11 lbs. FS1200 63-301-207 $89.99 DimensiOns mODel OrDer PriCe
24 6 13/16 22 FS2400 63-301-208 136.99 # # eaCh
36 6 13/16 31 FS3600 63-301-209 192.99 18"L x 3/4"W x 40"H SS1800 63-301-206 $70.79
remote Operated Dynamiclift magnet
™
WOrking lOaD limiT: FeATureS:
1/4" (6' lg) 3/8" (8' lg) 1/2" (8' lg) 3/4" (8' lg) 1" (10' lg) 2" (10' lg) 3" (10' lg) • Remote operated, locking, on/off Rare
368 lbs. 475 lbs. 550 lbs. 575 lbs. 600 lbs. 600 lbs. 600 lbs. Earth permanent magnet.
(166 kg.) (215 kg.) (249 kg.) (260 kg.) (272 kg.) (272 kg.) (272 kg.) • Will stay “on” if battery loses power.
*Maximum sheet length due to sag for material thickness for single magnet use. • Secondary manual release in case of
battery failure.
nOTe: • Indicator lights for magnet operational
• Lifting Values for the DynamicLift Magnets are stated at 33% of the state and battery strength.
™
actual value. • Built in safety - a load sensor and
• We recommend when lifting sheets over 8', use 2 or more lifts on a spreader a 3-button off sequence prevent
bar to prevent sheet flexing, sagging or peel-off. accidental release while under load.
• Thin material is susceptible to magnetic bleed through, resulting in two sheets • Includes (2), 12 volt rechargeable,
being lifted at once. Lithium-ion batteries (200 cycles per
• Please consult the factory before specifying these magnets for use on charge) and charger.
round materials.
*These maximum sheet lengths are selected due to the sag characteristics of the • 3:1 Design Factor.
specified sheet. The item to be lifted must cover the entire length and width of the • Heat resistant up to 180°F (82°C).
magnetic poles to properly engage and release the part. • Conforms to ASME B30.20 standards.
hOlDing Value DimensiOns WeighT mODel OrDer PriCe More Magnets
FlaT iTems # # eaCh
600 lbs. 4"W x 8.5"L x 12.5"H 20 lbs. DLR0600 63-301-313 $1,223.99 Pages 1414-1419