Page 545 - All Industrial Tool Supply | General Catalog

Countersink, Chamfer & Drilling Holders • T&O
543

Square Inserts - SCMT For high performance
7° Positive machining
Features:
• Square insert.
• Chipbreakers supplied for finishing.
♦ See Page 537 For Grade Information.
NoTe:
• Edge preparation with T-land and honing (S), without T-land and SCMT - S WiTh Chipbreaker SCMT - e WiTh Chipbreaker
a slight honing (E) is adapted to each grade. edge preparaTiOn WiTh a narrOW T-land and edge preparaTiOn iS FOr CaST irOn
hOning iS MeanT FOr STeelS and STainleSS STeel
_______PrICe eaCh_______
MaTerIal oPeraTIoN INSerT GraDe CoaTING I.C. ThICk- raDIuS FeeD TooTh SFM orDer 1-9 PCS. 10-29 PCS. 30+ PCS.
NeSS
#
#
fz (inch)
Finishing SCMT 432 S PC684M Yes 1/2" 3/16" .031" 0.004" 640 22-003-328 $20.80 $18.44 $16.39
Steel Roughing SCMT 432 S PC68M No 1/2 3/16 .031 0.008 320 22-003-330 14.55 12.91 11.47
AISI n° 4140
Roughing SCMT 432 S PC684M Yes 1/2 3/16 .031 0.008 380 22-003-328 20.80 18.44 16.39
Stainless Steel Finishing SCMT 432 S PC684M Yes 1/2 3/16 .031 0.004 420 22-003-328 20.80 18.44 16.39
AISI n° 304 Roughing SCMT 432 S PC684M Yes 1/2 3/16 .031 0.006 290 22-003-328 20.80 18.44 16.39
Cast iron
AISI n° 45B Roughing SCMT 432 E KIC18M No 1/2 3/16 .031 0.006 220 22-003-332 14.34 12.91 11.47
Indexable Mini-Drills For drilling, boring,
internal facing & turning
Torx SCrewS
®
MoDel orDer PrICe
# # eaCh
VT25 24-285-969 $7.27
VT40 24-285-970 7.22
TiN CoaTeD CarbIDe INSerTS
INSerT GraDe raDIuS orDer ________PrICe eaCh________
# # 1-9 PCS. 10-49 PCS. 50+ PCS. Includes: ♦ Insert Not Included.
CCMT2(1.5)1-FP BL692 0.016" 22-010-052* $8.01 $5.92 $5.13 • (1) Wrench. ♦ See Below For Drill Illustration.
CCMT3(2.5)1-F PC514 0.016" 22-003-056* 9.97 — — • (2) Spare screws.
*Limited Supply.
DrIllS
DrIll SIze ShaNk DIaMeTer _______________DIMeNSIoNS_______________ uSe uSe Torx ® uSe Torx ® orDer PrICe
DeSCrIPTIoN
øD D2 øD1 lT l1 l2 l3 INSerT # key # SCrew # # eaCh
D - 3/8 -1.0-06 .375" 1.000" 1.380" 3.620" 1.000" 1.870" 1.750" CCMT21.5 T8 VT25 24-285-930 $142.63
D - 1/2 - 1.2-06 .500 1.000 1.380 3.820 1.200 2.070 1.750 CCMT21.5 T8 VT25 24-285-931 142.63
D - 5/8 - 2.0-09 .625 1.000 1.380 4.600 2.000 2.850 1.750 CCMT32.5 T15 VT40 24-285-932 156.87

indexable Mini-drill appliCaTiOnS

NoTe:
When drilling from the solid, tool must be off center for: OD 3/8" x = .040"
OD 1/2" x = .020"
OD 5/8" x = .040"
drill FrOM SOlid bOring inTernal FaCing & Turning
“Flexi-Mill ” Indexable Countersink & Chamfering Tools Adjustable from
™
10° to 80°
Features:
• Uses a standard TCMT TiC/TiN coated carbide cutting insert and comes in two sizes,
330W-.750 (.750" shank) and 340W-1.000 (1.000" shank).
• Cutting angles are easily adjusted using the supplied Torx key to loosen the
®
adjustable cutting insert pocket screw, rotating the pocket to the desired setting, ♦ Insert Not Included.
and then retightening the Torx screw.
®
• Capability to countersink or chamfer any angle from 10° to 80°.
• Insert pocket is replaceable.
Includes: TCMT Inserts
• (1) Wrench. Page 538
• (2) Spare screws. angle graduaTiOn guide

FlexI-MIllS rePlaCeable PoCkeTS Torx SCrewS
®
_____________DIMeNSIoNS_____________ TiC/TiN CoaTeD uSe Torx ® MoDel orDer PrICe MoDel orDer PrICe MoDel orDer PrICe
D h6 l y D. min. D. max. CarbIDe INSerT key # # # eaCh # # eaCh # # eaCh
0.75" 4.000" 10° - 80° .200" 1.000" TCMT 21.5 T8 330 W 750 24-285-960 $272.33 S11 24-285-963 $64.84 VT25 24-285-969 $7.27
1.000 4.000 10° - 80° .200 1.250 TCMT 32.5 T15 340 W 1.000 24-285-961 286.74 S16 24-285-964 64.84 VT40 24-285-970 7.22