Page 850 - All Industrial Tool Supply | General Catalog

VISES • Accessories
848

Groove Lock Jaw & Accessories
®

Benefits:
• Simple, functional, integral work stop system.
• Does not interfere with part or spindle.
features:
• Single bolt design for tightening work stop.
Model #d60-315-P • Multiple parts can be located on the same jaw plate.
Model #WSRLE46
• Can be used on the right or left end of jaw.
• To use in center of jaw, locating ear must be shortened to
clear the top of the stationary jaw area.
Model #WSRl46
MODeL OrDer PrIce
DeScrIPTIOn
# # eAch
6" Groovelock Jaw Plate D60-315-P 61-421-111 $37.99
Work Stop Assembly WSRL46 61-421-112 15.99
Model #WSRle46 Extra Length Work Stop Assembly WSRLE46 61-421-113 22.79
Replacement Clamp Assembly WSRL46-86-SA 61-421-114 11.99
ShoWn With Model #WSRl46
3-In-One System Jaw Plates

aPPLiCatiOns: features: inCLudes:
• Bolt on jaw with a series of preset • Ideal for quick setups of common angle cuts. • (2) Jaw plates.
patterns with aligning pins. • Preset patterns in jaws provide for these 7 • (4) Pins: 6mm x 22mm (0.87")
• Allows aggressive machining while popular angles: 5°, 10°, 15°, 20°, 25°, 30°, 45°. • (3) Pins: 6mm x 40mm (1.58")
clamping at seven different angles. • Eliminates time consuming set ups. • (3) Pins: 6mm x 58mm (2.28")
• Doubles as a convenient workstop with the • (3) Pins: 6mm x 76mm (2.99")
additional benefit of acting as a parallel.
• Triples as a parallel.
• Adds versatility.
Model #KSJ6 • Made for Kurt in Sweden.

TOLerAnceS:
Jaw Tolerance: ±0.000787" (0.01mm)
Pin Sets Dimensional Tolerance: ±0.0007" (0.018mm)
Tolerance Between Holes: ±0.0004" (0.01mm)
FOr DIMenSIOnS MODeL OrDer PrIce
USe WITh L x W x h # # eAch
6" Vise 6" x 0.725" x 1.735" KSJ6 61-421-013 $314.00
ShoWn in uSe 8" Vise 8" x 1.075" x 2.20" KSJ8 61-421-014 577.00
DoveLock Quick change Master Jaw Kits & Machinable Jaws
™
Quick change for fast set-ups
in under 1 minute
aPPLiCatiOns:
• Fits all industry standard Kurt 6" vises.
features: inCLudes:
• DoveLock jaws are changed from the top by Models #DJ6 & #DJ6M
™
loosening 3 quick-clamps. • (2) Master jaws.
• Jaws can be removed from the front or side. • (4) Cap screws.
• Workstop for position repeatability to ±0.001". • (1) T-handle hex key.
• Aluminum jaws are machined not extruded. Models #DJ606AL, #DJ607AL,
• Jaws are machinable for part profile or steps. #DJ608AL & #DJ610AL
• Jaws can be turned 180° to do 2 different set-ups. • (2) Machinable aluminum jaws.
• Master jaws machined of 6061 aluminum.
Model #dJ6
MODeL OrDer PrIce
LenGTh WIDTh heIGhT
# # Per SeT
MASTer JAW KITS
6" 0.775" 1.725" DJ6 61-421-040 $149.00
6" 0.775" 1.725" DJ6M 61-421-041 159.00
JAW KITS
6" 1.250" 1.980" DJ606AL 61-421-042 $43.99
Model #dJ606Al 7" 1.500" 1.980" DJ607AL 61-421-043 52.99
8" 1.500" 1.980" DJ608AL 61-421-044 59.99
10" 1.500" 1.980" DJ610AL 61-421-045 63.99