Page 855 - All Industrial Tool Supply | General Catalog
P. 855
Chucks, "V" Blocks & Sine Plates • MAGNETIC HOLDING
853
Magnetic Toolmakers Chucks
Powerful Alnico
magnets
APPLICATIONS:
• Top, bottom and end magnetize simultaneously.
MODEL #MTC-S MODEL #MTC-L MODEL #MTC-LFP MODEL #MTC-VB
ModeL order PriCe
WidTh heighT LengTh FeATureS:
# # eACh
2" 2" 5" MTC-S 57-109-425 $442.99 • All models precision ground flat, Model #MTC-LFP
2-3/4 2-1/2 5-1/2 MTC-L 57-109-426 529.99 square and parallel to an overall • 3/16" x 1/16" fine pole construction
2-3/4 3 5-1/2 MTC-LFP 57-109-427 575.99 accuracy of .0005". for holding small or thin parts.
2-3/4 3-5/8 5-1/2 MTC-VB 57-109-428 575.99 • On/off switch. • Removable side and end rails.
Magnetic “V” Blocks
APPLICATIONS: FeATureS:
• Ideal for holding round and irregular • 145 lbs. of powerful holding force.
shapes for scribing, grinding, • Fine precision ground finish for use as
measuring and machining. an inspection device.
________APProxiMATe diMenSionS________ ModeL order PriCe
heighT WidTh LengTh L1 # # eACh
2-7/8" 2-1/8" 2-3/4" 1-1/2" TVH-1 57-081-101 $88.79
2-3/8 2-3/8 4 1-1/2 TVH-2 57-081-102 109.99
3-1/16 3 4 2 TVS-1 57-081-105 144.49
Precision Sine Plates Magnetic Chuck Parallels &
Universal “V” Blocks
Integrally Cast Into One Solid Piece
APPLICATIONS: APPLICATIONS:
• Useful for holding work while • “V” Blocks are universal (hold in any
inspecting, grinding and machining. direction on a magnetic chuck).
FeATureS: INCLudeS:
• 0.200" deep minute angle step in base. • 1" x 2" x 4" micro parallels ground all
• Made of hardened steel. over and in pairs.
• Tapped holes in top plate. MODEL #TSP-136 • Two V's: 1-7/8" x 2-3/8" x 2"
• Includes (2) end rails. • Large V: 2" round capacity
• Small V: 1/2" round capacity
deSCriPTion ModeL order PriCe
#
#
eACh
diMenSionS CenTer diSTAnCe SqUAre & WeighT ModeL order PriCe One Pair Magnetic Chuck Parallels 1 57-062-101 $39.99
L x W x h of roLLS PArALLeL # # eACh One Pair Magnetic Chuck V-Blocks 4 57-062-104 49.99
6" x 3-1/4" x 1-7/8" 5.000" within .0002" .0002" 8 lbs. TSP-136 81-300-004 $199.99 One Long V-Block 5 57-062-105 49.99
6" x 6" x 2-1/4" 5.000" within .0002" .0002" 15.4 lbs. TSP-266 81-300-008 298.49 Combination Set: Includes models #1 & #4 MVP-14 57-062-114 79.99
Single Angle Sine Plates
APPLICATIONS: FeATureS:
• Used for holding parts for inspection, machining and drilling. • Made from steel, hardened
to Rc 58 - 62.
• Dual .200" minute steps are built
into the gage block roll.
diMenSionS CenTer diSTAnCe SqUAre & WeighT ModeL order PriCe • Includes two end rails and one
L x W x h of roLLS PArALLeL # # eACh locking strap.
6" x 3" x 2" 5.000" within .0002" .0002" 9 lbs. SP-136 57-109-150 $497.99 • Tapped holes in top plates of
6 x 6 x 2 5.000 within .0002 .0002 18 SP-66-S1 57-109-151 729.99 models 6" x 6" or smaller are 1/4"-20. MODEL #SP-128-S2
6 x 12 x 2-5/8 5.000 within .0002 .0003 47 SP-612-S2 57-109-152† 1,463.99 All remaining models have 3/8"-16
12 x 6 x 2-5/8 10.000 within .0002 .0003 45 SP-126-S2 57-109-155 1,449.99 tapped holes.
12 x 8 x 2-5/8 10.000 within .0002 .0003 60 SP-128-S2 57-109-153† 1,897.99 • SineSet system compatible.
®
†Ships direct from factory. Truck ship only.
Strict production standards ensure that this certified line
is designed for your most demanding applications.
See pages 954, 957 & 969.