Page 930 - All Industrial Tool Supply | General Catalog

BORE MEASUREMENT • Depth Gages
928

Electronic Depth Gages

Features:
• IP54 protection.
• Hardened base and measuring face.
• Inch/metric conversion.
• Zero-set at any position.
• Glass made capacitance sensor provides superior accuracy.
Model #TedC-6

BaSE
RanGE accuRacy WIDth RESolutIon MoDEl oRDER PRIcE
Each
#
#
0 ~ 6" ±0.0015" 3.93" (100mm) 0.0005" (0.01mm) TEDC-6 57-052-766 $79.99
Model #TedC-12 0 ~ 12" ±0.0015" 3.93" (100mm) 0.0005" (0.01mm) TEDC-12 57-052-767 139.99
Dial Depth Gages 0~6" IP54 Depth Gage

Model #615-6132
aPPLICatIONs: Features: aPPLICatIONs: Features:
• Rapid measurement of bore depths. • Interchangeable rods. • Obtain measurements of the depth • Protected to IP54 standards.
• Removable contact points. of small holes, small grooved or • Direct RS232 output.
• Standard #4-48 thread. elevated surfaces and varying • Automatic switch off.
depths and heights. • Large LCD display.
DIal InDIcatoR MoDEl oRDER PRIcE
RanGE
REaDInG tRavEl # # Each RanGE BaSE RESolutIon MoDEl oRDER PRIcE
0 ~ 6" 0-100 0 ~ 1" 615-6132 57-015-575 $104.99 lEnGth # # Each
0 ~ 12" 0-100 0 ~ 1" 615-6136 57-015-576 117.79 0 ~ 6" (0 ~ 150mm) 4" .00005" (.001mm) 54-225-456 57-016-449 $214.99
Dial Depth Gage 3753 Series Electronic Depth Gages

Features:
• Hardened, stainless steel bar for
long life.
• Removable hook attachment for
BeNeFIts: measurements from the edge of a
• Measures depth, slot width, workpiece to the inside or outside
and hard-to-reach areas. edge of slots, grooves, etc.
• Simple, logical control buttons for • Lock to hold the slide in position.
ease-of-use. • Fine adjustment thumb roll for
• Easy-to-read LCD with .35" precision measurements.
Features: INCLudes: high characters. • Inch-millimeter conversion.
• Carbide contact point. • (2) Extra points for small hole • Single long-life battery, with • Zero at any position.
• Rods connect together for full applications, (1) 0.175" diameter x 1" easy access. • Manual ON/OFF with auto-off after
22" capacity. long and (1) needle point x 1" long. 5 minutes of non-use.
• Satin chrome finish. INCLudes: • Single, 3-Volt CR2032 battery.
• Complete in shop hardened case. • Plastic case. • Linear accuracy: ±.001" (±0.03mm)

MEaSuRInG RESolutIon MoDEl oRDER PRIcE
BaSE RoD InDIcatoR MoDEl oRDER PRIcE RanGE # # Each
RanGE GRaDuatIon
lEnGth DIaMEtER tRavEl # # Each 0 ~ 6" (0 ~ 150mm) .0005" (0.01mm) 3753A-6/150 57-015-037 $289.99
0 ~ 22" .001" 4" 0.176" 0 ~ 1" 52-125-006-1 57-015-157 $144.99 0 ~ 12" (0 ~ 300mm) .0005" (0.01mm) 3753A-12/300 57-015-038 366.99