Page 11 - Haimer Catalog

ZERO MASTER – UNIVERSAL MINI 3D-SENSOR
INCH

Ø 1.92"
Ø 10mm/ 0.39"

0.9764"

probe tips
long

1.5748" Ø 0.295" M3

3.7795" short
Ø 0.295"
M3
2.6"
1.06"

Ø 0.2"
0.2" 0.4"
Zero Master INCH
Small but nice
The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and
accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is
adapted to small machines. The diameter of the clamping shank is 10mm/
0.3937 inch.
Thus it can be also used on machines with ISO 30 or small HSK spindles.
The housing is shortened and does not protrude far out of the spindle so even
big work pieces can be measured. The Zero Master can be read on its small
analog dial gauge.
The Zero Master can be equipped with a short (ball diam. 0.2 inch) and a long
(ball diam. 0.4 inch) probe tip. Naturally, the probe tips are compatible with all
other HAIMER 3D-Sensors.
Please take note:
The given measuring precision of 0.0004" only applies if the original HAIMER
probe tips are used.
– IP67 waterproof

Technical details
Zero Master with clamping shank Ø 0.39" including short probe tip Ø 0.2“
Accuracy 0.0004"
Length without clamping shank 3.7795"
Order No. 80.960.00.IN
Accessories
Short probe tip Length 1“ – ball tip Ø 0.2"
Order No. 80.365.20
Technical data subject to change without prior notice Long probe tip length Length 2.6“ – ball tip Ø 0.4"
Order No. 80.365.30
Short probe tip Ø 0.2"
Long probe tip Ø 0.4"

Technical data subject to change without prior notice
Phone: 1–866–837–3265 Haimer USA www.haimer-usa.com 11