Page 9 - Haimer Catalog
P. 9
3D-SENSOR DIGITAL
INCH
2.6"
¯ 3/4"
1.97"
probe tips
long
Ø 0.295"
3D-T aster
M3
-0,1000 0
inch set 4.4" short
MOD ON/OFF
E
SET Ø 0.295"
M3
2.6"
1.06"
¯ 0.2" 0.2" 0.4"
Digital 3D-Sensor
Highly accurate – safe handling
The Digital 3D-Sensor is a further development of the time proven Mechanical
3D-Sensor. It serves for setting workpiece edges on milling and EDM machines.
The spindle may be positioned quickly and safely on the reference edge. The
setting operation can be exactly monitored on the digital display and the zero
position is found on the first try. The machine coordinate system can be set
without any calculations because the spindle axis is positioned exactly on the
approached edge.
The digital display has large numbers that measure in increments of 0.0002“.
It can be easily read from a long distance (i.e. when mounted on a large machin-
ing center).
The digital display is splash-proof and dust-proof (IP64) and can be stored in the
tool magazine of the machine.
Short probe tip Ø 0.2"
Long probe tip Ø 0.4"
Technical details Recommended HAIMER tool holders
3D-Sensor Digital with clamping shank, diam. 3/4“ including short probe tip Ø 0.2" Order No.
Smallest unit of measure 0.00005" Short chuck CAT 40 40.720.32
Repeatability 0.00005" Short chuck CAT 50 50.720.32
Measuring accuracy 0.0002" Short chuck HSK-A63 A63.020.32
Display Short chuck HSK-A100 A10.020.32
Display mode May be switched to inch or metric Please order ER collet along with above holders:
Display size 1.8" x 0.9"
Height of numbers 0.3" ER 32 - 3/4" collet 81.320.20
Service life of battery (continuous operation) approx. 3000 hrs (additional taper styles please see ER
Order No. 80.460.00.IN or HG collet chuck section)
Accessories
Short probe tip Length 1" – ball tip Ø 0.2"
Order No. 80.365.20
Long probe tip Length 2.6" – ball tip Ø 0.4"
Order No. 80.365.30
Technical data subject to change without prior notice
Phone: 1–866–837–3265 Haimer USA www.haimer-usa.com 9