Page 4 - Haimer Catalog

UNIVERSAL 3D-SENSOR
INCH

2.6"
Ø 3/4"

1.97"

probe tips
long
0 90
90 10 10 Ø 0.295"
20 80 M3
80 3D- Taster 20
Made in
Germany
2 0.01 mm -2
70 30
30 70 short
1 -1
0
40
60 40 60
50 4.4"
Ø 0.295"
M3
2.6"
1.06"
0.2" 0.4"
¯ 0.2"
Universal 3D-Sensor INCH
The Universal 3D-Sensor is a very precise and versatile edge-finding measuring Short and long probes are available. The sensor probes can be changed without
Universal 3D-Sensor Problems with mathematics or calculations are eliminated, allowing for fewer
ever needing a tool. No re-calibration of the unit is needed during a sensor probe
instrument for milling and EDM machines (insulated probe). Made entirely at the
HAIMER Germany facility, it is an instrument that no shop can do without. operator erro y, reducing the extra time
change over. Simply bring the needle to Zero, and that is your edge with any probe.
The Universal 3D-Sensor is a very precise and versatile edge-finding, measur- needed with most edge-finders, increasing the productivity and accuracy
The accuracy is such that you are able to inspect your parts right on the machine.
The 3D-Sensor is clamped into a tool holder and inserted into a milling spindle.
Tram vises, find the center of your bore, find your edge and inspect parts - it is all
ing instrument for milling and EDM machines (insulated probe). Made entirely of the operator.
Once clamped into the machine spindle, the run-out (T.I.R) is fully adjustable to
possible with the HAIMER 3D-Sensor. The unit has a large overrun distance in con-
at the HAIMER Germany facility, it is an instrument that no shop can do with- Short and long probes are available. The sensor probes may be changed
zero. Then, you are able to find exact positioning of the spindle axis on the edges
nection with the fully tested preset breaking points giving the sensor long life. All
out. The 3D-Sensor is clamped into a tool holder and inserted into a milling without any tool. No re-calibration of the unit is needed during a sensor probe
of the workpiece. This allows for zeros to be set and the length to be measured

Universal 3D-Sensors are individually tested and adjusted when being assembled
spindle. Once clamped into the machine spindle, the run-out (T change over. Simply bring the needle to Zero, and that is your edge with
quickly and easily. You may approach from any direction (X-, Y-, Z- axis – hence
in order to achieve a maximum of measuring precision.
the name „3D-Sensor“). When the dial gage shows zero, the spindle axis is ex- any probe. The accuracy is such that you are able to inspect your parts right
adjustable to Zero. Then, you are able to find exact positioning of the spindle
actly on the workpiece edge. on the machine. Tram vises, find the center of your bore, find your edge and
– IP 67 waterproof
axis on the edges of the workpiece. This allows for zeros to be set and the
Only the HAIMER 3D-Sensor allows for the edge to be found on the first attempt. inspect parts - it is all possible with the HAIMER 3D-Sensor,
length to be measured quickly and easily. You may approach in any direction
No calculating of the probe’s ball diameter is necessary – just zero it out! Problems a large overrun distance in connection with the fully tested preset breaking
(X-, Y-, Z- axis – hence the name „3D-Sensor“). When the dial gage shows
with mathematics or calculations are eliminated, allowing for fewer operator er- points giving the sensor long life. All Universal 3D-Sensors are individually
zero, the spindle axis is exactly on the workpiece edge. Only the HAIMER 3D-
rors. Our 3D-Sensor is quick and easy, reducing the extra time needed with most
Sensor allows for the edge to be found on the first attempt. No calculating of tested and adjusted when being assembled in order to achieve a maximum
edge-finders, thus increasing the productivity and accuracy of the operator.
the probe’s ball diameter is necessary – just Zero it out! of measuring precision.
Short probe tip Ø 0.2“
Long probe tip Ø 0.4“
Technical details Recommended HAIMER tool holders
Universal 3D-Sensor with clamping shank Ø 20 mm including short probe tip Ø 3/4“ Order No.
Accuracy 0.0004“ Short chuck CAT 40 40.720.32
Length without clamping shank 4.4“ Short chuck CAT 50 50.720.32
Order No. 80.360.00.IN Short chuck HSK-A63 A63.020.32
Accessories Short chuck HSK-A100 A10.020.32
Please order ER collet along with above holders:
Short probe tip Ø 0.2“ ER32 3/4“ collet 81.320.20
Order No. 80.365.20 (additional taper styles please see ER or HG collet chuck section)
Long probe tip Ø 0.4“
Order No. 80.365.30
Technical data subject to change without prior notice
4 Phone: 1–866–837–3265 Haimer USA www.haimer-usa.com