Page 5 - Haimer Catalog

UNIVERSAL 3D-SENSOR
METRIC

65 mm 65 mm
Ø 20 mm Ø 20 mm

50 mm 50 mm

probe tips
long
0 0 Ø 7.5 mm Ø 7.5 mm
90 10 90 10 90 10 90 10
M3
20 UNIVERSAL 3D-TASTER 80 M3
80 IP 67 20 80 20 UNIVERSAL 3D-TASTER 80
Made in IP 67 20
Germany Made in
Germany
70 2 0.01 mm -2 30 2 0.01 mm -2
30 1 0 -1 70 70 30 1 -1 30 70 short
40 0
60 40 60 60 40 40
50 113 mm 60 113 mm
50 Ø 7.5 mm Ø 7.5 mm
M3 M3
69 mm 69 mm
27 mm 27 mm
4 mm 4 mm 4 mm 4 mm 8 mm 8 mm

Universal 3D-Sensor METRIC
The Universal 3D-Sensor is a very precise and versatile measuring instrument for Simply bring the needle to Zero, and that is your edge with any probe. The accu-
milling and EDM machines (insulated probe). The 3D-Sensor is clamped into a tool racy is such that you are able to inspect your parts right on the machine. Tram
holder and inserted into a milling spindle. Once clamped into the machine spindle, vises, find the center of your bore, find your edge and inspect parts - it is all pos-
the run-out (T.I.R) is fully adjustable to zero. Then, you are able to find exact posi- sible with the HAIMER 3D-Sensor. The unit has a large overrun distance in connec-
tioning of the spindle axis on the edges of the workpiece. This allows for zeros to tion with the fully tested preset breaking points giving the sensor long life. All
be set and the length to be measured quickly and easily. You may approach from Universal 3D-Sensors are individually tested and adjusted when being assembled
any direction (X-, Y-, Z- axis – hence the name „3D-Sensor“). When the dial gage in order to achieve a maximum of measuring precision.
shows zero, the spindle axis is exactly on the workpiece edge. – IP 67 waterproof
Only the HAIMER 3D-Sensor allows for the edge to be found on the first attempt.
No calculating of the probe’s ball diameter is necessary – just zero it out! Problems
with mathematics or calculations are eliminated, allowing for fewer operator er-
rors. Our 3D-Sensor is quick and easy, reducing the extra time needed with most
edge-finders, increasing the productivity and accuracy of the operator.
Short and long probes are available. The sensor probes can be changed without
ever needing a tool. No re-calibration of the unit is needed during a sensor probe
change over.

Short probe tip Ø 4 mm
Long probe tip Ø 8 mm

Technical details Recommended HAIMER tool holders
Universal 3D-Sensor with clamping shank Ø 20 mm including short probe tip Ø 4 mm Order No.
Accuracy 0.01 mm Short chuck SK 40 40.305.20
Length without clamping shank 113 mm Short chuck SK 50 50.300.20
Order No. 80.360.00.FHN Short chuck BT 40 40.500.20
50.500.20
Accessories Short chuck BT 50 A50.000.20
Short chuck HSK-A 50
Short probe tip Ø 4 mm Short chuck HSK-E 50 E50.000.20
Order No. 80.362.00 Short chuck HSK-A 63 A63.000.20
Long probe tip Ø 8 mm Short chuck HSK-A 80 A80.000.20
Order No. 80.363.00 Short chuck HSK-A 100 A10.000.20
Technical data subject to change without prior notice
Phone: 1–866–837–3265 Haimer USA www.haimer-usa.com 5