Page 14 - Haimer Catalog

CENTRO
THE MOST ROBUST COAXIAL INDICATOR AVAILABLE IN THE MARKET

42
64 mm/2.52"
Ø 16 mm/0.63"

48 mm/1.89"

0
90 10 90 10
20 80
80 CENTRO 20
Ma de in
Germ any
70 0.01 mm 70 30
30
0 1 2 3
144 mm/5.67"
60 40 60 40 probe tips
50
B W straight bent

Ø 5mm/0.2" Ø 5 mm Ø 2 mm Ø 5 mm

CENTRO provides quick and precise location of the centers
of bores and shafts.
Center bores and arbors quickly and precisely Further advantages:
The Centro is clamped in a tool holder and positioned close to the sought axis. – Check the axial run-out of the work piece to the spindle
The probe tip is adjusted and touches the bore or arbor all the way around. – Compensation of the run-out errors of the spindle and tool holder
Dial gauge always in field of vision >> No adjustment necessary
With low rpm the probe slides along the bore or arbor. – Even from longer distances, the large size of the dial gauge is easy to see
Its movement is transferred to the dial gauge. By using an antenna the Centro – Replaceable probes
does not spin around and stays in field of vision.
By using the Centro you find the axis of bores or arbors - reliably
As long as the spindle is out of the center of the bore or arbor the hands of the
dial gauge stay in movement. By changing the position of x- and y- axis at the
machine you can jibe the axis of the spindle and the work piece.

Technical details Recommended HAIMER tool holders
Centro with straight probe tip, Ø 5 mm/0.2", clamping shank Ø 16 mm/0.63" for Centro Order No.
Centering accuracy 0.003 mm/0.0001" CAT 40 40.720.25
Max. rotation speed 150 RPMs CAT 50 50.720.25
Measuring range interior diameter (drill hole) 3-125 mm/0.1"-5" Please order ER collet along with above holders:
Measuring range exterior diameter (shaft, with probe tip bent) 0-125 mm/0-5" ER 25 - 16 mm collet 81.250.16
40.500.16
BT 40
Order No. 80.300.00.FHN
BT 50 50.500.16
Accessories SK 40 40.300.16
Probe tip straight with diameter of ball 5 mm/0.2" SK 50 50.300.16
Order No. 80.301.00 HSK-A 40 A40.000.16
HSK-E 40 E40.000.16
Probe tip bent with diameter of ball 5 mm/0.2" HSK-A 50 A50.000.16
Order No. 80.302.00 HSK-E 50 E50.000.16
Probe tip straight with diameter of ball 2 mm/0.08", for small bores HSK-A 63 A63.000.16
Order No. 80.303.00 HSK-A 100 A10.000.16
Technical data subject to change without prior notice

14 Phone: 1–866–837–3265 Haimer USA www.haimer-usa.com