Page 237 - Techniks Catalog 2017

Spindle Wipers – Analog & Touch Lamp Preset Gauges

Spindle Wipers Magnetic V-Blocks & V-Block Sets
• For CAT, BT, ISO, HSK spindles • See page XX
• Keep spindle and tapers clean • Fast and powerful workholding

Part No. Taper
17706 30
17707 40
Real lambskin provides the best 17708 50
cleaning. Use with any type of
machine with a taper of 7/24 38036 HSK63A
CAT, BT or DIN 69871. 38032 HSK63F

Analog Axial Preset Gauge Features
• Accuracy 0.0002"
• Easy to measure tool depth
• Height 50mm

1. Use the gauge pin included to press
Analog Axial Preset Gauge down on the spring-loaded center 3. Put the unit on the workpiece and
piece as illustrated. Please be sure
Part No. Description the gauge pin is placed on the shiny carefully jog the tool down to make
17906-2 ZSI-50 preset gauge surface. contact with the gauge face. When
2. Turn the indicator to read “0”, then the gauge reads "0" the tool is 2"
17906-04 replacement dial
remove the gauge pin. above the workpiece.

Touch Lamp Axial Preset Gauge Features
• Accuracy .0002"

• 360˚ red lamp lights up when touched
• Height 2" (50mm)
• Magnetic base (use vertically or horizontally)
Instructions
1. Check height of unit with a gauge
block and dial indicator. Turn allen
screw on the side of the unit if 1. 2. 3. 4.
adjustment is needed.
2. Do not use calipers for presetting X
unit, only use gauge block.
3. Move the cutting tool tip towards
the sensor button until the unit
lights up, then reverse direction Touch Lamp Axial Preset Gauge
until the light goes off.
4. When presetting diameter, rotate Part No. Description A B C
tool slowly for higher precision. 07905-2 ZOP-50 Gauge 56mm 50mm or 2" 13.5mm

We stand behind all our products with our 100% Satisfaction Guarantee • www.techniksusa.com 235