Page 242 - Techniks Catalog 2017

MagVISE For Large Workpieces

70MM Pole Features:

• Up to 98,767 lbs. holding power
• Reduce setup time by 50%
• Machine freely on 5-sides

Our 70MM pole chucks provide the increased holding power
needed for large workpieces, thick plates, blocks and molds. Great choice
for drilling, milling, and boring operations on vertical or horizontal mills.
They easily integrate with pallet changing and tombstone systems.
We stand behind our workholding solutions with full factory support 70mm pole chucks provide the most powerful flux
to guarantee your satisfaction. Custom solutions built to your specifica- lines with the deepest extension into the workpiece.
tions are fully tested and are provided at no extra cost. Most effective for over-sized workpieces.

S = 1.2" G = 0.78"
S1 = 1" M = 1.2"

Figure 1 Figure 2 Figure 3
Model Fig L x W x H Poles Holding Pwr. Subplate Single Phase Control Weight
EEPM-3060D-220 1 26.4"x13.4"x2.8" 18 27,778 lbs. EEPM-3060DISP 220-480V EEPM-C1 278 lbs.
EEPM-4050D-220 2 20.9"x16.9"x2.8" 20 30,864 lbs. EEPM-4050DISP 220-480V EEPM-C1 278 lbs.
EEPM-4060D-220 2 26.4"x16.9"x2.8" 24 37,037 lbs. EEPM-4060DISP 220-480V EEPM-C1 350 lbs.
EEPM-4080D-220 2 33.5"x16.9"x2.8" 32 49,383 lbs. EEPM-4080DISP 220-480V EEPM-C2 445 lbs.
EEPM-5060D-220 2 26.4"x20.5"x2.8" 30 46,297 lbs. EEPM-5060DISP 220-480V EEPM-C2 425 lbs.
EEPM-5080D-220 2 33.5"x20.5"x2.8" 40 61,729 lbs. EEPM-5080DISP 220-480V EEPM-C2 538 lbs.
EEPM-6060D-220 3 26.4"x26.0"x2.8" 36 55,556 lbs. EEPM-6060DISP 220-480V EEPM-C2 540 lbs.

EEPM-6080D-220 3 33.5"x26.0"x2.8" 48 74,075 lbs. EEPM-6080DISP 220-480V EEPM-C2 683 lbs.
EEPM-8080D-220 3 33.5"x33.1"x2.8" 64 98,767 lbs. EEPM-8080DISP 220-480V EEPM-C4 870 lbs.

240 Call 800.597.3921 or 317.803.8000 for a fast friendly quote. • Fax: 317.803.8001