3M 7100284873 | 3015NP 75' OAL x 6.000" Width Specialty Application Tape

3M Air and vapor barrier 3015NP is an air, moisture and water impermeable film membrane with an aggressive, high-tack pressure sensitive acrylic adhesive. It reduces air leakage and uncontrolled airflow from the building envelope, prevents moisture ingress and helps improve indoor air quality. It does not require the use of a primer on most construction surfaces.

• 3M Air and Vapor Barrier 3015NP is a film membrane that is impermeable to air, moisture, water and vapor. It is comprised of an aggressive high-tack acrylic adhesive on a multi-layer elastomeric film that self-seals around screws, nails and staples to further reduce moisture intrusion, and passes ASTM D1970 both before and after thermal cycling. The adhesive is compatible with a wide range of common sealants including synthetic rubber, butyl, polyurethane, silicone and silane-terminated hybrid sealants, and sticks well to common construction substrates including concrete, concrete block, anodized aluminum, galvanized metal, plywood, extruded polystyrene and most exterior gypsum sheathing. This allows for primer-free application from lightweight rolls and up to 40% faster installation compared to traditional air barriers that require a primer. The film is slightly translucent, providing a clean look while still allowing enough visibility to identify screws in the underlying sheathing and thus reduce the risk of the next contractor missing studs. This product can be applied at surface temperatures ranging from 0°F (-18°C) up to 150°F (66°C), has a service temperature range from -40°F (-40°C) up to 240°F (116°C), and can with stand up to 12 months of direct UV exposure. This barrier has been evaluated by the Air Barrier Association of America.

• Air, vapor and water barrier for new and remedial commercial construction
• Installed on exterior wall sheathing and behind exterior cladding
• Transition building envelope from one substrate to another, or other openings and penetrations

• High-tack acrylic adhesive for excellent compatibility with most sealants and building materials
• No primer needed-installs up to 40% faster* compared to traditional barriers that require a primer
• Apply at surface temperatures from 0°F (-18°C) up to 150°F (66°C) for increased production
• Impermeable to air, moisture, vapor and water
• Multi-layer elastomeric film self-seals around screws, nails and staples
• Slightly translucent film provides a clean look while minimizing the risk of missing the stud
• Features measurement markings at 6-inch grid intersections for ease in alignment and cutting
• Lighter weight than competitive products for easier handling
• ABAA evaluated

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov