Roemheld CLR-200-AP | 4000 - 7250 PSI Range Air Pump Unit

ROEMHELD Air Pump Units, D8.602

7250 psi max
For Single-Acting and Double-Acting Systems

Low-cost hydraulic power source that requires only a shop-air connection to operate. This compact, portable unit weighs only 14 lbs.. Only 75-psi air pressure is required to provide 7250-psi hydraulic pressure. Suitable for smaller clamping fixtures and assembly operations where automatic pressure control is not required. Unlike Air Power Units, these Air Pump Units do not automatically restart to maintain system pressure, and require a separate air regulator to set hydraulic pressure at anything other than 7250 psi.

Design Considerations

Flow Rate vs. Pressure

Mounting & Setup

Mount horizontally or vertically. Unit is ready to run after you fill the reservoir with clean, approved Hydraulic Fluid and connect to an air supply. A separate air regulator is required to set hydraulic pressure at anything other than 7250 psi. No air lubricator is required-unit can be operated with oil-free air. Do not use NPT fittings for hydraulic connections.

Parts Specification

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov