Page 302 - Ceratizit Catalog
P. 302

The universal tooling system UTS
   A281
             Manual (radial) clamping




           By turning the actuator to the right (approx. 3.5 revolutions)   retract.
           the lock rod moves towards the centre. Due to the angled   The taper remains in the self-locked condition (taper ratio
           ball tracks the clamping balls are pushed outwards into the   1:10). The cutting head is released via positive axial thrust
           bores of the cutting head, drawing it towards the location face   through the bump-off pin.
           and into the adapter. During this movement the adapters are
           elastically deformed allowing true taper and face location.

           This results in a stable and precise connection.

           With manual clamping the actuator has to be fixed applying a
           defined torque:

           Torques:
           UT40   16 Nm
           UT50   32 Nm
           UT63   50 Nm

           Unclamping is achieved by turning the actuator to the
           left. The lock rod moves outwards and the clamping balls




                                             2
             1                                                           3
                                                                                            1 Tool head
                                                                                            2 Clamping unit
                                                                                            3 Balls
                                                                                            4 Location face
                                                                                            5 Bump-off pin
                                                                                            6 Lock rod
                                                                                            7 Actuator






















               4                 5                     6                   7





      Turning / Technical information  Manual clamping is mainly applied in the field of modular
           constructions and lathes with longer tool changing intervals.
           The extremely short and compact construction represents a
           further advantage.
   297   298   299   300   301   302   303   304   305   306   307