Page 626 - Tungaloy Catalog

TAC Mills
TGE4400RIU
Standard cutting conditions
Specifications
45° LEAD 45° Lead Close Pitch Face Mill Work materials Grades Roughing (Depth of cut: ap .059 ~ .157 in) Finishing (Depth of cut: ap .012 ~ .028 in)
500 ~ 300
NS740 Cutting speed vc (SFM) Feed per tooth fz (ipt) Cutting speed vc (SFM) Feed per tooth fz (ipt)
.009 ~ .008
500 ~ 300
.009 ~ .010
N308 500 ~ 820 .009 ~ .008 500 ~ 820
Mild steels AH330 500 ~ 400 500 ~ 400
Unhardened steels AH120 • GH330 500 ~ 820 .009 ~ .010 500 ~ 820 .009 ~ .011
(< 180 HB) T3130 500 ~ 280 590 ~ 300
AH130• AH140• UX30 325 ~ 590 .009 ~ .011 425 ~ 650 .009 ~ .012
T3130 500 ~ 750 .009 ~ .010 590 ~ 280 .009 ~ .011
NS740 325 ~ 750 .009 ~ .007 500 ~ 750
Carbon steels N308 325 ~ 590 .009 ~ .007 500 ~ 650 .009 ~ .009
Alloy steels AH330 325 ~ 320 500 ~ 320
(< 300 HB) AH120 • GH330 325 ~ 650 .009 ~ .009 500 ~ 650 .009 ~ .010
UX30 260 ~ 425 .009 ~ .010 325 ~ 500 .009 ~ .011
AH120 • GH330 325 ~ 500 325 ~ 500
Die steels (< 30 HRC) AH330 325 ~ 820 .009 ~ .006 325 ~ 820 .009 ~ .008
UX30 260 ~ 425 260 ~ 425
AH130 • AH140 260 ~ 590 .006 ~ .010 325 ~ 650 .006 ~ .011
Stainless steels
(< 9.84 HB) AH120 500 ~ 750 .006 ~ .009 650 ~ 820 .006 ~ .010
UX30 500 ~ 590 590 ~ 650
Cast irons T1115 325 ~ 650 325 ~ 650
Ductile cast irons TH10 • UX30 260 ~ 425 .004 ~ .008 260 ~ 425 .009 ~ .010
Aluminum alloys TH10 650 ~ 3300 .002 ~ .008 1148 ~ 3280 .009 ~ .012
(Si < 13%) DX140 .002 ~ .007 .009 ~ .008
Copper alloy TH10 650 ~ 1640 .004 ~ .008 650 ~ 1640 .009 ~ .010
Notes: • Dry cutting is recommended for all materials except for aluminum alloys.
• Maximum depth of cut for DX140 SDCN42ZFN-DIA is 2 in.
• When wet machining mild steels, carbon steels and alloy steels, use T3130 at lower cutting conditions.

9

TAC Mills

• RPM=SFM X 3.82 ÷ Cutter Dia.
• Table feed (in/min) = RPM  Feed per tooth  No. of inserts
 : Stocked items.
Most unmarked items are available on a RFQ basis, contact your sales rep for more information.
Relating Technical Reference 9–39
pages (14-1)