Roemheld CLR-225-V | 143mm Height 3-Way Clamping Valve

Hand Operated

7250 psi maxFor Single-Acting Systems

Use individual clamping valves to clamp several workpieces independently with a single power source. 3-way clamping valves are used to control single-acting clamps. These high-quality valves have a zero-leakage poppet design, with a built-in check valve. Extremely compact. The hand-operated valve is controlled by a hand knob that can be turned 360° in both clockwise and counterclockwise directions, with a detent position every 90°. To clamp or unclamp, turn knob 90° in either direction.

Mounting & Fluid Supply

Mounting with Standard Fittings:

Fasten valve to fixture using the four tapped mounting holes underneath the base. Mount in any position, horizontal or vertical.

For manifold mounting, order clamping valve without mounting base (use the three O-ring ports underneath the valve). Fasten valve to fixture using the four mounting screws furnished.

Clamping valve has three ports:

Use only with clean, approved hydraulic fluid. Fluid must be kept clean (10 micron or better nominal filtration). Do not use NPT fittings.

Parts Specification

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov