Page 656 - Tungaloy Catalog

TAC Mills
TSE4000RIAU
Replacement parts

Part Cat. No.
No. Parts TSE4003RIAU TSE4005RIAU ~
TSE4004RIAU TSE4012RIAU

q a Locator LE403R/L LE405R/L
b Insert locking wedge WF330N WF500R
c Wedge fixing screw FDS-8S FDS-8S
w d Locator fixing screw CM4×0.7×14 CM4×0.7×14
r - T-handle wrench TP-4 TP-4
e
Standard cutting conditions

Roughing (Depth of cut ap: > 0.59 in) Finishing (Depth of cut ap: .012 ~ .028 in)
Work materials Grades
Cutting speed vc (SFM) Feed per tooth fz (ipt) Cutting speed vc (SFM) Feed per tooth fz (ipt)
AH330 425 ~ 1200 150 ~ 400
Mild steels AH120 • GH330 425 ~ 750 .004 ~ .008 500 ~ 800 .004 ~ .009
Unhardened steels T3130 425 ~ 980 .004 ~ .009 590 ~ 980 .004 ~ .010
(< 180 HB) NS740 • N308 425 ~ 650 .004 ~ .007 500 ~ 800 .004 ~ .008
UX30 • AH140 330 ~ 590 .004 ~ .008 425 ~ 650 .004 ~ .009
AH330 330 ~ 900 150 ~ 320
AH120 • GH330 330 ~ 590 .004 ~ .007 500 ~ 650 .004 ~ .008
Carbon steels 425 ~ 900 .004 ~ .008 425 ~ 650 .004 ~ .009
T3130
Alloy steels AH140 260 ~ 425 .004 ~ .007 330 ~ 650 .004 ~ .007
(< 300 HB)
NS740 • N308 330 ~ 500 .004 ~ .006 500 ~ 650 .004 ~ .007
UX30 260 ~ 425 .004 ~ .007 330 ~ 500 .004 ~ .008
Stainless steels AH130 • AH140 260 ~ 590 .004 ~ .008 330 ~ 650 .004 ~ .010
(< 9.84 HB) AH120 500 ~ 650 .004 ~ .007 650 ~ 820
AH330 330 ~ 800 330 ~ 800 9
Die steels
(< 30 HRC) T3130 • AH120 • GH330 330 ~ 500 .004 ~ .006 330 ~ 500 .004 ~ .008
UX30 260 ~ 425 260 ~ 425
Cast irons T1115 330 ~ 650 330 ~ 650
Ductile cast irons TH10 260 ~ 425 .004 ~ .008 260 ~ 425 .004 ~ .010 TAC Mills
Aluminum alloys TH10 .002 ~ .010 .004 ~ .010
(Si < 13%) DX140 650 ~ 3300 .002 ~ .006 350 ~ 1000
Copper alloys TH10 650 ~ 1650 .004 ~ .006 650 ~ 1650 .004 ~ .008

Note: • Dry cutting is recommended for all materials except for aluminum alloys.
• Maximum depth of cut for TECN43ZFR-DIA is .138 in.
• When wet machining mild steels, carbon steels and alloy steels, use T3130 at lower cutting conditions.

-1
• RPM (min ) = Cutting speed  1000 ÷ 3.14 ÷ Cutter diameter
• Table feed (in/min) = RPM  Feed per tooth  No. of inserts
 : Stocked items.
Most unmarked items are available on a RFQ basis, contact your sales rep for more information.
Relating Technical Reference 9–69
pages (14-1)