null

Fullerton Tool 92471 | 7mm Diameter x 7mm Shank x 25mm LOC x 64mm OAL 3 Flute Uncoated Solid Carbide Square End Mill

$46.22 $29.12
(You save $17.10)
Ships:
From Partner Facility
Brand:
Fullerton Tool
Mill Diameter (mm):
7mm
Number of Flutes:
3
Length of Cut (Decimal Inch):
0.9843"
Length of Cut (mm):
25mm
Shank Diameter (Decimal Inch):
0.2756"
Shank Diameter (mm):
7mm
Overall Length (mm):
64mm
Material:
Solid Carbide
Finish/Coating:
Uncoated
Single or Double End:
Single
Cutting Direction:
Right Hand
Flute Direction:
Right Hand
Center Cutting:
Yes
Series:
3835 AlumaMill
Ships:
From Partner Facility
SKU:
25003839
UPC:
Weight:
0.10 LBS
Shipping:
Calculated at Checkout

Features

  • The 3835 AlumaMill is a 3-flute, high performance end mill designed for aggressive material removal rates in aluminum and non-ferrous materials
  • Its high polish and unique cylindrical margin design produces superior wall finishes
  • The 3835 AlumaMill is stocked uncoated and with FC-19 coating

Product Specifications
Cutting Diameter (Decimal Inch) 0.2756"
Cutting Diameter (mm) 7.00mm
Cutting Flute Length (Decimal Inch) 0.9843"
Cutting Flute Length (mm) 25.00mm
Shank Diameter (Decimal Inch) 0.2756"
Shank Diameter (mm) 7.00mm
Overall Length (Decimal Inch) 2.5197"
Overall Length (mm) 64.00mm
Coating/Finish Uncoated
Metric/Inch Metric
Number of Flutes 3
Helix Angle (Degrees) 36
Flute Spiral Direction Right Hand
Direction of Cut Right Hand
Point End Type Square
End Type Character Designation S
End Type Single End
Coolant Through Non Coolant Through
Weldon Flat No
Length Standard
Length Designator SD

 

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Brand:
Fullerton Tool
Mill Diameter (mm):
7mm
Number of Flutes:
3
Length of Cut (Decimal Inch):
0.9843"
Length of Cut (mm):
25mm
Shank Diameter (Decimal Inch):
0.2756"
Shank Diameter (mm):
7mm
Overall Length (mm):
64mm
Material:
Solid Carbide
Finish/Coating:
Uncoated
Single or Double End:
Single
Cutting Direction:
Right Hand
Flute Direction:
Right Hand
Center Cutting:
Yes
Series:
3835 AlumaMill
Ships:
From Partner Facility