714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Product Specifications
| EDP Number | 18R7ANR |
| Product Code - ANSI | GCGN3002-GA-H10 |
| Manufacturer Grade Identification | H10 |
| Series | GND |
| Maximum Depth of Cut (Decimal Inch) | 0.7500" |
| Maximum Depth of Cut (mm) | 20.00mm |
| Cutting Width (Decimal Inch) | 0.1181" |
| Cutting Width (mm) | 3.00mm |
| Height (Decimal Inch) | 0.1496" |
| Nose Radius (Decimal Inch) | 0.0079" |
| Nose Radius (mm) | 0.20mm |
| Insert Thickness (Decimal Inch) | 0.1496" |
| Insert Thickness (mm) | 3.80mm |
| Relief Angle | 7 Degree |
| Coating | Noncoated |
| Coating Process | Noncoated |
| Standard Designation of the Grade, Main Application | N |
| Primary Workpiece Material | N |
| Secondary Workpiece Material | N |
| Chip Breaker | GA |
| Insert Hand | N |
| Insert Material | Carbide |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
Sumitomo
Material:
Carbide
Cutting Width (Inch):
1/8"
Cutting Width (Decimal Inch):
0.1181"
Cutting Width (mm):
3.00mm
Maximum Depth of Cut (Inch):
3/4"
Maximum Depth of Cut (Decimal Inch):
0.7500"
Maximum Depth of Cut (mm):
20.00mm
Manufacturer's Grade:
H10
Coating:
Noncoated
Insert Hand:
N
Cutting Height (Inch):
5/32"
Cutting Height (Decimal Inch):
0.1496"
Cutting Height (mm):
3.80mm
interval quantity:
5
Ships:
From California in 1-2 Days
