Page 1366 - Ceratizit Catalog
P. 1366

W1104, coated
   F369
             Cutting data





                                                                            f [mm/rev]
                                                 = Ø 3,0      > Ø 5,0       > Ø 8,0       > Ø 12,0      > Ø 16,0
                                        V c
            Index  Material designation  [m/min]  = Ø 5,0     = Ø 8,0       = Ø 12,0      = Ø 16,0      = Ø 20,0
            1.1.1  Machining steels     90       0,14           0,2          0,275         0,35          0,45
            1.1.2                       75        0,1          0,15           0,2          0,26          0,325
            1.2.1  Constructional steel  90      0,14           0,2          0,275         0,35          0,45
            1.2.2                       75        0,1          0,15           0,2          0,26          0,325
            1.2.3                       70        0,1          0,15           0,2          0,26          0,325
            1.3.1  Spring steel
            1.3.2
            1.3.3
            2.1.1  Cementation steel    80       0,14           0,2          0,275         0,35          0,45
            2.1.2                       75       0,14           0,2          0,275         0,35          0,45
            2.1.3                       70        0,1          0,15           0,2          0,26          0,325
            2.2.1  Nitriding steel      70        0,1          0,15           0,2          0,26          0,325
            2.2.2                       70        0,1          0,15           0,2          0,26          0,325
            2.3.1  Tempered steel       75       0,14           0,2          0,275         0,35          0,45
            2.3.2                       70        0,1          0,15           0,2          0,26          0,325
            2.3.3                       70       0,14           0,2          0,275         0,35          0,45
            2.3.4                       70        0,1          0,15           0,2          0,26          0,325
            2.3.5                       55        0,1          0,15           0,2          0,26          0,325
            2.3.6
            3.1.1  Non alloyed tool steel  55     0,1          0,15           0,2          0,26          0,325
            3.2.1  Tool steel for cold working  70  0,1        0,15           0,2          0,26          0,325
            3.2.2                       55        0,1          0,15           0,2          0,26          0,325
            3.2.3                       32        0,1          0,15           0,2          0,26          0,325
            3.2.4
            3.2.5
            3.3.1  Tool steel for hot working  55  0,1         0,15           0,2          0,26          0,325
            3.3.2
            3.3.3
            3.3.4
            3.3.5
            3.5.1  Hardened tool steel < 55 HRC
            3.5.2              55–58 HRC
            3.5.3              58–60 HRC
            3.5.4              60–62 HRC
            3.5.5              62–64 HRC
            4.1.1  Stainless steel
            4.1.2
            4.1.3
            4.1.4
            4.1.5
            4.2.1  Heat-resistant alloys
            4.2.2
            4.2.3
            4.2.4
            5.1.1  Conventional cast steel  75   0,14           0,2          0,275         0,35          0,45
            5.1.2                       70        0,1          0,15           0,2          0,26          0,325
            5.1.3                       55        0,1          0,15           0,2          0,26          0,325
            5.2.1  Stainless cast steel
            5.2.2
            6.1.1  Cast iron with lamellar graphite  85  0,23  0,335         0,425         0,52          0,58
            6.1.2                       75       0,23          0,335         0,425         0,52          0,58
            6.1.3                       70       0,23          0,335         0,425         0,52          0,58
            6.1.4                       65       0,08          0,12          0,15           0,2          0,25
            6.2.1  Spheroidal cast iron   80      0,2          0,25          0,35           0,4          0,46
            6.2.2                       75        0,2          0,25          0,35           0,4          0,46
            6.2.3                       55       0,08          0,12          0,15           0,2          0,25
            6.3.1  GTW (white malleable cast iron)  80  0,2    0,25          0,35           0,4          0,46
            6.3.2                       75        0,2          0,25          0,35           0,4          0,46
            6.4.1  GTS (black malleable cast iron)  80  0,2    0,25          0,35           0,4          0,46
            6.4.2                       75        0,2          0,25          0,35           0,4          0,46
            7.1.1  Aluminium
            7.1.2
            7.1.3
            7.1.4
            7.1.5
            7.1.6
            7.2.1  Magnesium
            7.2.2
            7.3.1  Copper
            7.3.2
      Solid carbide tools / Drilling  7.3.5  CuZn (brass)
            7.3.3
            7.3.4
            7.3.6
            7.4.1
            7.4.2
            7.5.1
                   CuSn (bronze)
            7.5.2
            7.6.1
                   CuAlFe (Ampco)
            7.6.2
            7.8.1
                   Titanium
            7.8.2
            7.8.3
   1361   1362   1363   1364   1365   1366   1367   1368   1369   1370   1371