Page 831 - Ceratizit Catalog
P. 831
Tool - setting
C226
Recommended application
Tool overhang
In order to avoid vibration the work piece should be clamped with the minimum overhang possible.
Advice for part-off operations
From dia. 5 mm on, reduce feed rate For parting pip-free, use R or L In order to prevent ring formation,
‘f’ by approx. 50%. inserts. use R or L inserts.
No part-off across centre (risk of Reduce feed rate ‘f’ by approx. 20% Reduce feed rate ‘f’ by approx. 20%
breakage). - 50% to minimise lateral deflection. - 50% to minimise lateral deflection.
Advice for grooving operations
a
s
When grooving with an axial dis- When grooving inclined surfaces the Parting and grooving / Technical information
placement the width ‘a’ should be feed should be reduced by approx.
at least 70% of the cutting width ‘s’. 20% - 50% at the beginning.
