Page 833 - Ceratizit Catalog
P. 833
MSS-GX, SX, LX, FX
C228
Reduced parting and grooving depth
Reduced parting and grooving depth
The MSS parting and grooving modules are selected by size
to suit a certain work piece diameter (D ). If the diameter
max
of the work piece is bigger than D of the module, then
max
the achievable parting and grooving depth is reduced by
dimension ‘a’. The extent of the reduction is established by
reference to the following table.
T max
T red.
a
T max = maximum grooving depth
D max at T max D max = maximum work piece diameter with full grooving
depth T
(a = 0)
max
a = reduction of grooving depth
D
T = T – a
red. max
Work piece diameter (mm)
Assembly size
E12 35 40 45 60 75 115 >250
E16 50 55 60 70 80 100 130 200 >420
E20 60 65 70 75 85 95 110 130 165 220 >330
E25 75 80 85 90 100 110 125 140 160 190 240 320 >500
E32 95 100 105 110 120 125 135 145 160 180 200 225 270 320 400 530 >800
0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0
Reduction of the maximum grooving depth a (mm)
Maximum work piece diameter (D max )
in case of full parting and grooving depth (T max ) in mm
Calculation example: module
MSS- E25 R 21-GX24-3 Parting and grooving / Technical information
E25 assembly size 25
D = Ø 100 mm => T – a = T
max red.
21 T max = 21 mm, Ø 75 mm 21 – 2 = 19 mm

