null

SGS 38841 | 1/2" Diameter x 1/2" Shank x 1-1/4" LOC x 3-1/4" OAL 5 Flute AlTiN Coated Corner Radius End Mill

$121.58
Brand:
SGS
Number of Flutes:
5
End Type:
Corner Radius
Corner Radius (Inch):
1/64"
Corner Radius (Decimal Inch):
0.0100"
Corner Radius (mm):
0.25mm
Length of Cut (Inch):
1-1/4"
Length of Cut (Decimal Inch):
1.2500"
Length of Cut (mm):
31.75mm
Finish/Coating:
TA
Shank Diameter (Inch):
1/2"
Shank Diameter (Decimal Inch):
0.5000"
Shank Diameter (mm):
12.7mm
Overall Length (Inch):
3-1/4"
Overall Length (Decimal Inch):
3.2500"
Overall Length (mm):
82.55mm
Cutting Direction:
RHC
SKU:
25197858
UPC:
691781388417
Weight:
0.28 LBS
Shipping:
Free Shipping
Features:
  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
  • Enhanced corner geometry with tight tolerance corner radius
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
 
Product Specifications
Cutting Diameter (Inch)1/2"
Shank Diameter (Inch)1/2"
Length of Cut (Inch)1-1/4"
Overall Length (Inch)3-1/4"
Cut of DirectionRight Hand
Flute TypeSpiral
Corner Radius (Inch)0.01"
Helix Angle37 Degree
CoatingAlTiN
Number of Flutes5

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Brand:
SGS
Number of Flutes:
5
End Type:
Corner Radius
Corner Radius (Inch):
1/64"
Corner Radius (Decimal Inch):
0.0100"
Corner Radius (mm):
0.25mm
Length of Cut (Inch):
1-1/4"
Length of Cut (Decimal Inch):
1.2500"
Length of Cut (mm):
31.75mm
Finish/Coating:
TA
Shank Diameter (Inch):
1/2"
Shank Diameter (Decimal Inch):
0.5000"
Shank Diameter (mm):
12.7mm
Overall Length (Inch):
3-1/4"
Overall Length (Decimal Inch):
3.2500"
Overall Length (mm):
82.55mm
Cutting Direction:
RHC