Double clamp boring bar for holding a 55° rhombus negative insert with an inscribed circle diameter of 1/2'', 1/4'' thick (ANSI designation DN.. 44. ), left hand 93° end cutting with off-set shank, steel with coolant hole, 1.1/2'' diameter x 12'' long for internal chamfering, taper boring, single and multi-directional copy boring and longitudinal boring with and without shoulder.
Product Specifications
EDP Number | 6788508 |
Functional Width (Inch) | 1.125" |
Coolant Supply Property | 1 |
Orthogonal Rake Angle | -6 |
Inclination Angle | -11 |
Maximum Axial Groove Outside Diameter (mm) | |
Connection Diameter (mm) | 38.1 mm |
Connection Diameter (Inch) | 1.5" |
Shank Height (Inch) | 1.374" |
Minimum Bore Diameter (Inch) | 2" |
Functional Length (Inch) | 12" |
Head Length (Inch) | 1.299" |
Clamping Type Code | System D |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Ships:
From Partner Facility
Brand:
Pramet
Rake Angle:
-6
Shank Height (Inch):
1-3/8"
Shank Height (Decimal Inch):
1.3740"
Shank Height (mm):
34.9mm
interval quantity:
1