714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Double clamp turning tool for holding a square negative insert with an inscribed circle diameter of 12.7 mm, 4.76 mm thick (ISO designation SN.. 1204.. ), right hand 45° side cutting with off-set shank according to ISO 26623 (Polygon Shank Coupling) size C4, with 27 mm funtional width and 42 mm protruding length for chamfering, taper turning, single and multi-directional copy turning, face turning without shoulder and longitudinal turning without shoulder.
Product Specifications
| EDP Number | 7809800 |
| Functional Width (mm) | 27 mm |
| Functional Width (Inch) | 1.063" |
| Functional Width Secondary (mm) | 18.7 mm |
| Coolant Supply Property | 1 |
| Tool Cutting Edge Angle | 45 |
| Orthogonal Rake Angle | -8 |
| Maximum Axial Groove Outside Diameter (mm) | |
| Connection Diameter (mm) | 40 mm |
| Connection Diameter (Inch) | 1.575" |
| Minimum Bore Diameter (mm) | |
| Minimum Bore Diameter (Inch) | 4.331" |
| Functional Length (mm) | 42 mm |
| Functional Length (Inch) | 1.654" |
| 50.3 mm | |
| Clamping Type Code | System D |
| Functional Width Secondary (Inch) | 0.736" |
| Direction of Tool | Right |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Ships:
From Partner Facility
Brand:
Pramet
interval quantity:
1
