Carr Lane CLR-36-H | 1/4 Inner Diameter x 36 Overall Length Heavy-Duty Hose

Product Information

7250 psi Max Heavy-Duty Hose is ideal for long, flexible hydraulic connections, such as the line from a power source to a fixture. This high-pressure hose is reinforced with four plies of high-tensile wire for remarkably little expansion under pressure (fluid required due to expansion is only .066 cu.in. per foot at 7500 psi). 1/4" inside diameter. 5" minimum bend radius. 28,000 psi minimum burst pressure provides a safety factor over 3-to-1 at 7250 psi.The version shown here has swivel-nut ends for 37 Degree-flare fittings. Choice of many standard lengths, from 18 to 72" long. For longer runs, use a CLR-301-F Union Fitting to connect two hoses. Special lengths are available upon request (10 feet maximum).

Design Considerations & Safety Precautions

Do not use any type of hose other than our Heavy-Duty Hose or Fixture Hose with our power workholding products.

Parts Specification

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov