3M 7100175582 | SecureFit X5005V-ANSI Red Safety Helmet

3M SecureFit X5000 Series Safety Helmets provide comfort and security for workers in a variety of situations. With features such as a climbing helmet-inspired design that meets occupational safety requirements; compatibility with a variety of 3M Face shields, Earmuffs, and other accessories; and a suspension that incorporates exclusive 3M Pressure Diffusion Technology. Tying in a beam 100 feet up. Scaling a 1200-foot tower. When you work at height, this just another day at the office. But when it comes to safety, 3M believes the bar can always be raised higher. the 3M SecureFit Safety Helmet. From this proprietary design to this industry-leading innovations, the 3M SecureFit Safety Helmet is engineered with workers in mind. The result is a revolutionary helmet design. Comfort without compromise.

The 3M SecureFit Safety Helmet X5000 provides comfort and security for workers in a variety of situations because it features climbing helmet-inspired design that meets occupational safety requirements, works with a variety of 3M face shields, earmuffs and other accessories, and the suspension incorporates exclusive 3M patented Pressure Diffusion technology.

The 3M SecureFit Safety Helmet X5000 meets ANSI Z89.1 and is tested to select impact and penetration requirements of the European EN12492 Mountaineering Helmet Standard for industrial climbing applications, and is designed to provide head protection from small falling objects. Not only does it have modern climbing-helmet inspired design, it also provides increased comfort and security due to 3M’s Pressure Diffusion technology designed into the suspension. The brimless design helps to allow for enhanced awareness of some hazards. Moreover, the 3M SecureFit suspension uses 3M patented pressure diffusion technology that increases comfort while also providing a secure fit by reducing the force on the forehead up to 20%, compared to 3M conventional helmet suspension. A smooth, easy turning ratchet suspension system allows for tightening of the headband. There are also 15 adjustment settings on the 3M SecureFit Helmet X5000 series that allows for different height and front-to-back adjustments. It sits low on the head to reduce pressure, increase comfort and security. It also comes with a UV indicator sensor that changes color as the hard hat is exposed to ultra violet (UV) light. The hard hat should be replaced when the sensor changes from red to white, because the sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect they are. Helmet is equipped with accessory slots and clips that can work with variety of 3M accessories and other 3M PPE products. *EN12492 Shock Absorbing (clauses 4.2.1.1, 4.2.1.2, 4.2.1.3, 4.2.1.4) and Penetration (clause 4.2.2).

Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as they as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult on-site safety professional, industrial hygienist, or other subject matter expert.

Features:

• Climbing Helmet Inspired Design: Provides comfort and security for workers in construction, manufacturing, telecommunications, wind energy, oil and gas utilities, forestry, or any commercial trade that works at height
• Pressure Diffusion Technology: Reduces the pressure on the forehead by 20% on average compared to a conventional 3M helmet suspension
• Customize Fit: Smooth, easy-turning, 6-point ratchet suspension sits low on the head and allows wearer to customize height and fit
• Vented: Vents on sides and back are designed to allow airflow through the hard hat
• UV Indicator: Proprietary UV indicator lets wearer know when to replace helmet due to UV exposure
• Meets ANSI Z89.1: Meets the performance requirements of ANSI Z89.1. and tested to various of the impact and penetration requirements of the European EN12492 Mountaineering Helmet Standard for industrial climbing applications
• Works with PPE: Works with a variety of personal protection equipment like 3M face shields, safety eye glasses, ear muffs, and other accessories
• For industrial/occupational use only.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov