Not sure if this is the Wall Mounted Phase Converter you need? Check out our Sizing Chart here.
ADX Series, Extreme Duty - This SMART Series Phase Converter is manufactured in the USA by American Rotary and will convert 1 to 3 Phase power and provide 100% power for 208-250v equipment.
The ADX series phase converters have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.
Best for: High Inertia/friction loads such as pumps, fans, compressors, blowers, dust collectors and fly wheels.
Features
- Made in the USA
- Modular & Expandable
- VIT Generator
- Full Current Latching Starter
- 3 Phase Breaker and Receptacle Slots
- MicroSmart Digital Industrial Programmable Controller
Single motor start max. (HP) | 7.5 |
CNC/VFD (HP) | 7.5 |
Resistive/Oven (amps) | 21 |
Rectified/Welder (amps) | 21 |
kW of Generator (based on FLA) | 11.2 |
Idler/Generator FLA | 40 |
Frequency (Hz) | 60 |
Generator Type | GENTEC/Variable Impendence |
Magnetic Starter | Included (remote start ready) |
Panel Enclosure | NEMA 1 |
Temperature Rating | 40 C Ambient |
Wave Form | Pure Sinusoidal Analog |
Phase Angle | 120 degrees |
Efficiency | 0.97 |
Output Voltage | Equals input voltage |
Voltage Tolerance | Meets IEEE Std 241-1990 utility |
3-Phase Output Configuration | 3-Wire Delta |
Service Factor | 1.5 |
Output Frequency (Hz) | Input Frequency |
3-phase output current recommended for CNC, welder, VFD, voltage sensitive | 20 |
Maximum Current for IEEE Standard Utility Line | 24 |
Voltage Input | 208-250 |
Input Frequency (Hz) | 60 |
(HP Load / 1-PH Amps) | 5/20 |
(HP Load / 1-PH Amps) | 7.5/34 |
(HP Load / 1-PH Amps) | 12/59 |
Power Consumption (kW) | 0.23 |
Cost to Run (@.10/kW/HP) | $0.23/hr |
Minimum Breaker Size | 2 x load current |
A 25% restocking fee will apply to this item if returned due to buyer's remorse, or not returned due to damage or defects.

Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov

Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
The focus of American Rotary, is always on innovative engineering, product development, and outstanding customer service. The results are great American made phase converters that work flawlessly, provide unparalleled performance and are easy to install, all at an affordable price.
Designed for Phase Converters
American Rotary's VIT generator features Variable Impendence Technology. VIT provides a Soft Start using only 1/3 of the starting current to get the idler generator started unlike the traditional off-the-shelf 3 phase motors found in typical motors with shafts removed found in typical phase converters. The VIT provides precise power, runs cooler for longer life and can run continuously from a no load condition through full load.
Built-in Magnetic Starter
American Rotary's magnetic starter provides the means to continuously control your American Rotary phase converter remotely, from multiple locations or in conjunction with automatic equipment. See the Expandable Design Remote Start Feature for more information on remote start options.
Double or Triple your power!
All American Rotary Phase Converters are capable of phase synchronization for increased capacity. Converters can be daisy chained together to double, triple, quadruple your power. Call or email the American Rotary technical staff for more information on available options.
Easy Access Wiring
Designed to meet UL minimum space requirements, American Rotary enclosures have removable sides so that the oversized terminal blocks can be accessed with ease. The cover is hinged and can be easily removed.
SMART CONTROL
The American Rotary MicroSmart Controller is a patent technology which provides precise control of the phase converter. It monitors the voltage every 50 milliseconds providing better voltage control, prolonging the life of the converter, handles significantly more load capacity (ADX and AI), and enabling several failsafe features that are only available on American Rotary's SMART Series phase converters. (AD, ADX, and AI units only)
Powerful Load Starting Capability.
High inertia and high friction loads such as air-compressors, blower, fans, flywheel & lifting loads can draw 6 times FLA (full load amps) for several seconds during start up. The CTR acts as a stabilizer, ensuring consistent voltage and current. CTR allows our ADX and AI phase converters to start your high inertia machinery with ease in about 1/3 the time of a standard phase converter. (ADX and AI units only)