Features
- The 3833 AlumaMill G3 is a 3-flute, high performance end mill designed for roughing and finishing aluminum and non-ferrous materials
- It excels in aggressive plunging and ramping speed environments and was designed for fast material removal and multi-purpose machining
- Its flute shape and relief form generates superior wall finishes, while its unique wiper geometry produces excellent floor finishes
- The 3833 AlumMill G3 is stocked uncoated and with FC-5 coating
Product Specifications
Mill Diameter (Inch) | 5/16" |
Cutting Flute Length (Inch) | 1-1/4" |
Shank Diameter (Inch) | 5/16" |
Overall Length (Inch) | 4" |
Mill Diameter (Decimal Inch) | 0.3125" |
Cutting Flute Length (Decimal Inch) | 1.2500" |
Shank Diameter (Decimal Inch) | 0.3125" |
Overall Length (Decimal Inch) | 4" |
Mill Diameter (mm) | 7.94mm |
Cutting Flute Length (mm) | 31.75mm |
Shank Diameter (mm) | 7.94mm |
Overall Length (mm) | 101.60mm |
Finish/Coating | FC5 |
Number of Flutes | 3 |
Helix Angle | 37.5 Degree |
Flute Spiral Direction | Right Hand Spiral |
Cutting Direction | Right Hand Cutting |
Coolant Thorugh (Yes/No) | No |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
Fullerton Tool
Mill Diameter (Inch):
5/16"
Mill Diameter (Decimal Inch):
0.3125"
Mill Diameter (mm):
7.94mm
Number of Flutes:
3
Length of Cut (Inch):
1-1/4"
Length of Cut (Decimal Inch):
1.2500"
Length of Cut (mm):
31.75mm
Material:
Solid Carbide
Overall Length (Inch):
4"
Overall Length (Decimal Inch):
4"
Overall Length (mm):
101.60mm
Shank Diameter (Inch):
5/16"
Shank Diameter (Decimal Inch):
0.3125"
Shank Diameter (mm):
101.60mm
Finish/Coating:
FC5
Cutting Direction:
Right
Single or Double End:
Single
Helix Angle (Degree):
37.5 Degree
Flute Direction:
Right
Application:
Aluminum & Non-Ferrous Materials
Series:
3833 AlumaMill G3
Ships:
From Partner Facility