null

Fullerton Tool 92162 | 6mm Diameter x 6mm Shank x 29mm LOC x 76mm OAL 2 Flute Uncoated Solid Carbide Square End Mill

$42.82 $26.98
(You save $15.84)
Ships:
From Partner Facility
Brand:
Fullerton Tool
Mill Diameter (mm):
6.00mm
Number of Flutes:
2
Length of Cut (Decimal Inch):
1.1417"
Length of Cut (mm):
29mm
Shank Diameter (Decimal Inch):
0.2362"
Shank Diameter (mm):
6.00mm
Overall Length (mm):
76mm
Material:
Solid Carbide
Finish/Coating:
Uncoated
Single or Double End:
Single
Cutting Direction:
Right Hand
Flute Direction:
Right Hand
Center Cutting:
Yes
Ships:
From Partner Facility
SKU:
25003586
UPC:
Weight:
0.05 LBS
Shipping:
Calculated at Checkout
Fullerton Tool 92162 | 6mm Diameter x 6mm Shank x 29mm LOC x 76mm OAL 2 Flute Uncoated Solid Carbide Square End Mill

Features

  • The 3215 General Purpose end mill has 2-flutes and was designed for use in titanium, super alloys, stainless steels, steels, cast iron, brass & copper, and low si aluminum
  • It is offered in a variety of configurations and is available with single-end and double-end designs
  • The 3215 General Purpose end mill is stocked uncoated and with TiAlN, TiCN, and TiN coatings

Product Specifications
Cutting Diameter (Decimal Inch) 0.2362"
Cutting Diameter (mm) 6.00mm
Cutting Flute Length (Decimal Inch) 1.1417"
Cutting Flute Length (mm) 29.00mm
Shank Diameter (Decimal Inch) 0.2362"
Shank Diameter (mm) 6.00mm
Overall Length (Decimal Inch) 2.9921"
Overall Length (mm) 76.00mm
Coating/Finish Uncoated
Metric/Inch Metric
Number of Flutes 2
Helix Angle (Degrees) 30
Flute Spiral Direction Right Hand
Direction of Cut Right Hand
Point End Type Square
End Type Character Designation S
End Type Single End
Coolant Through Non Coolant Through
Weldon Flat No
Length Extra Long
Length Designator XL

 

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Brand:
Fullerton Tool
Mill Diameter (mm):
6.00mm
Number of Flutes:
2
Length of Cut (Decimal Inch):
1.1417"
Length of Cut (mm):
29mm
Shank Diameter (Decimal Inch):
0.2362"
Shank Diameter (mm):
6.00mm
Overall Length (mm):
76mm
Material:
Solid Carbide
Finish/Coating:
Uncoated
Single or Double End:
Single
Cutting Direction:
Right Hand
Flute Direction:
Right Hand
Center Cutting:
Yes
Ships:
From Partner Facility

Related Products